ATSTK600 Datasheet, PDF (1/1 Pages) ATMEL Corporation – Getting Started Guide

Introduction
STK600-LCDx
Getting Started Guide
The STK600-LCDx is a breakout board for a 160 segment LCD display. It is used
together with the STK600 and an ATxmega MCU w/ LCD driving capabilities.
LCD to STK600 connection
The STK600-LCD160 is connected to the STK600 through a set of 10-pin ribbon cables.
The ATxmega devices that only supports 100 segments can also be used, but with a
reduced set of segments on the LCD. The STK600-LCDx should then be connected to the
STK600 through the five rightmost headers.