ATF1502SE Datasheet, PDF (1/69 Pages) ATMEL Corporation – Family Datasheet

Features
• 2nd Generation EE PROM-based Complex Programmable Logic Devices
– V_CCIO of 5.0V or 3.3V with 3.3V Operation being 5V Tolerant
– 32 - 256 Macrocells with Enhanced Features
– Pin-compatible with Industry Standard Devices
– Speeds to 5 ns Maximum Pin-to-pin Delay
– Registered Operation to 250 MHz
• Enhanced Macrocells with Logic Doubling^™ Features
– Bury Either Register or COM while Using the Other for Output
– Dual Independent Feedback Allows Multiple Latch Functions per Macrocell
– 5 Product Terms per Macrocell, expandable to 40 per Macrocell with Cascade
Logic, Plus 15 more with Foldback Logic
– D/T/Latch Configurable Flip-flops plus Transparent Latches
– Global and/or per Macrocell Register Control Signals
– Global and/or per Macrocell Output Enable
– Programmable Output Slew Rate per Macrocell
– Programmable Output Open Collector Option per Macrocell
– Fast Registered Input from Product Term
• Enhanced Connectivity
– Single Level Switch Matrix for Maximum Routing Options
– Up to 40 Inputs per Logic Block
• Advanced Power Management Features
– ITD (Input Transition Detection) Available Individually on Global Clocks, Inputs and
I/O for µA Level Standby Current for “L” Versions
– Pin-controlled 1 mA Standby Mode
– Reduced-power Option per Macrocell
– Automatic Power Down of Unused Macrocells
– Programmable Pin-keeper Inputs and I/Os
• Available in Commercial and Industrial Temperature Ranges
• Available in All Popular Packages Including PLCC, PQFP and TQFP
• EE PROM Technology
– 100% Tested
– Completely Reprogrammable
– 10,000 Program/Erase Cycles
– 20 Year Data Retention
– 2000V ESD Protection
– 200 mA Latch-up Immunity
• JTAG Boundary-scan Testing Port per IEEE 1149.1-1990 and 1149.1a-1993
– Pull-up Option on JTAG Pins TMS and TDI
• IEEE 1532 Compatibility for Fast In-System Programmability (ISP) via JTAG
• PCI-compliant
• Security Fuse Feature
ATF15xxSE
Family
Datasheet
ATF1502SE(L)
ATF1504SE(L)
ATF1508SE(L)
ATF1516SE(L)
Preliminary
Rev. 2401D–PLD–09/02
1