|
ATA6831C Datasheet, PDF (1/17 Pages) ATMEL Corporation – Triple Half-bridge Driver with SPI and PWM | |||
|
Features
⢠Supply Voltage up to 40V
⢠RDSon Typically 0.8Ω at 25°C, Maximum 1.5Ω at 150°C
⢠Up to 1.0A Output Current
⢠Three Half-bridge Outputs Formed by Three High-side and Three Low-side Drivers
⢠Capable of Switching Loads such as DC Motors, Bulbs, Resistors, Capacitors, and
Inductors
⢠PWM Capability up to 25kHz for Each High-side Output Controlled by External PWM
Signal
⢠No Shoot-through Current
⢠Very Low Quiescent Current IVS < 2µA in Standby Mode over Total Temperature Range
⢠Outputs Short-circuit Protected
⢠Selective Overtemperature Protection for Each Switch and Overtemperature
Prewarning
⢠Undervoltage Protection
⢠Various Diagnostic Functions such as Shorted Output, Open Load, Overtemperature
and Power-supply Fail Detection
⢠Serial Data Interface, Daisy Chain Capable, up to 2MHz Clock Frequency
⢠QFN18 Package
1. Description
The Atmel® ATA6831C provides fully protected driver interfaces designed in SOI tech-
nology. They are used to allow a microcontroller to control up to three different loads
in automotive and industrial applications.
Each of the three high-side and three low-side drivers is capable of driving currents up
to 1.0A. Due to the enhanced PWM signal (up to 25kHz) it is possible to generate a
smooth control of, for example, a DC motor without any noise. The drivers are inter-
nally connected to form three half-bridges and can be controlled separately from a
standard serial data interface, enabling all kinds of loads, such as bulbs, resistors,
capacitors and inductors, to be combined. The IC design especially supports the
application of H-bridges to drive DC motors.
Protection is guaranteed with respect to short-circuit conditions, overtemperature and
undervoltage. Various diagnostic functions and a very low quiescent current in
standby mode enable a wide range of applications. Automotive qualification (protec-
tion against conducted interferences, EMC protection and 2-kV ESD protection) gives
added value and enhanced quality for exacting requirements of automotive
applications.
Triple
Half-bridge
Driver with SPI
and PWM
Atmel
ATA6831C
Preliminary
9215CâAUTOâ06/11
|
▷ |