|
ATA6826_09 Datasheet, PDF (1/15 Pages) ATMEL Corporation – Triple Half-bridge DMOS Output Driver with Serial Input Control | |||
|
Features
⢠Supply Voltage up to 40V
⢠RDSon Typically 0.8Ω at 25°C, Maximum 1.5Ω at 150°C
⢠Up to 1.0A Output Current
⢠Three Half-bridge Outputs Formed by Three High-side and Three Low-side Drivers
⢠Capable of Switching all Kinds of Loads Such as DC Motors, Bulbs, Resistors,
Capacitors and Inductors
⢠No Shoot-through Current
⢠Very Low Quiescent Current IS < 2 µA in Standby Mode versus Total Temperature
Range
⢠Outputs Short-circuit Protected
⢠Overtemperature Protection for Each Switch and Overtemperature Prewarning
⢠Undervoltage Protection
⢠Various Diagnostic Functions Such as Shorted Output, Open-load, Overtemperature
and Power-supply Fail Detection
⢠Serial Data Interface, Daisy Chain Capable, up to 2 MHz Clock Frequency
⢠SO14 Power Package
1. Description
The ATA6826 is a fully protected Triple Half-bridge designed in Smart Power SOI
Technology, used to control up to 3 different loads by a microcontroller in automotive
and industrial applications.
Each of the 3 high-side and 3 low-side drivers is capable of driving currents up to
1.0A. The drivers are internally connected to form 3 half-bridges and can be controlled
separately from a standard serial data interface. Therefore, all kinds of loads such as
bulbs, resistors, capacitors and inductors can be combined. The IC design especially
supports the application of H-bridges to drive DC motors.
Protection is guaranteed regarding short-circuit conditions, overtemperature and
undervoltage. Various diagnostic functions and a very low quiescent current in
standby mode opens a wide range of applications. Automotive qualification gives
added value and enhanced quality for exacting requirements of automotive
applications.
Triple
Half-bridge
DMOS Output
Driver with
Serial Input
Control
ATA6826
4834EâBCDâ09/09
|
▷ |