ATA6663 Datasheet, PDF (1/20 Pages) ATMEL Corporation – LIN Transceiver

Features
• Operating Range from 5V to 27V
• Baud Rate up to 20Kbaud
• Improved Slew Rate Control According to LIN Specification 2.0, 2.1 and SAEJ2602-2
• Fully Compatible with 3.3V and 5V Devices
• Atmel ATA6663: TXD Time-out Timer, Atmel ATA6664: No TXD Time-out Timer
• Normal and Sleep Mode
• Wake-up Capability via LIN Bus (90µs Dominant)
• External Wake-up via WAKE Pin (35µs Low Level)
• INH Output to Control an External Voltage Regulator or to Switch the Master Pull-up
• Very Low Standby Current During Sleep Mode (10µA)
• Wake-up Source Recognition
• Bus Pin Short-circuit Protected versus GND and Battery
• LIN Input Current < 2µA if V_BAT Is Disconnected
• Overtemperature Protection
• High EMC Level
• Interference and Damage Protection According to ISO/CD 7637
• Fulfills the OEM “Hardware Requirements for LIN in Automotive Applications Rev.1.1”
LIN Transceiver
Atmel ATA6663
Atmel ATA6664
1. Description
The Atmel ATA6663 is a fully integrated LIN transceiver complying with the LIN
specification 2.0, 2.1 and SAEJ2602-2. The Atmel ATA6664 is an identical version,
the only difference is that the TXD-dominant Time-out function is disabled so the
device is able to send a static low signal to the LIN bus. It interfaces the LIN protocol
handler and the physical layer. The device is designed to handle the low-speed data
communication in vehicles, for example, in convenience electronics. Improved slope
control at the LIN bus ensures secure data communication at up to 20Kbaud with an
RC oscillator for protocol handling. Sleep Mode guarantees minimal current consump-
tion even in the case of a floating bus line or a short circuit on the LIN bus to GND.
The ATA6663/ATA6664 feature advanced EMI and ESD performance.
9146D–AUTO–09/10