ATA6561_14 Datasheet, PDF (1/17 Pages) ATMEL Corporation – High-speed CAN Transceiver with Standby Mode CAN FD Ready

ATA6560/ATA6561
High-speed CAN Transceiver with Standby Mode
CAN FD Ready
DATASHEET
Features
● Fully ISO 11898-2,-5, SAE J2284 compliant
● CAN FD ready
● Communication speed up to 5Mbit/s
● Low electromagnetic emission (EME) and high electromagnetic immunity (EMI)
● Differential receiver with wide common mode range
● Atmel ATA6560: Silent mode (receive only)
● Remote wake-up capability via CAN bus
● Functional behavior predictable under all supply conditions
● Transceiver disengages from the bus when not powered up
● RXD recessive clamping detection
● High electrostatic discharge (ESD) handling capability on the bus pins
● Bus pins protected against transients in automotive environments
● Transmit data (TXD) dominant time-out function
● Undervoltage detection on VCC and VIO pins
● CANH/CANL short-circuit and overtemperature protected
● Qualified according to AEC-Q100
● Packages: SO8, DFN8 with wettable flanks (Moisture Sensitivity Level 1)
Description
The Atmel^® ATA6560/ATA6561 is a high-speed CAN transceiver that provides an interface
between a controller area network (CAN) protocol controller and the physical two-wire CAN
bus. The transceiver is designed for high-speed (up to 5Mbit/s) CAN applications in the
automotive industry, providing differential transmit and receive capability to (a microcon-
troller with) a CAN protocol controller. It offers improved electromagnetic compatibility
(EMC) and electrostatic discharge (ESD) performance, as well as features such as:
● Ideal passive behavior to the CAN bus when the supply voltage is off
● Direct interfacing to microcontrollers with supply voltages from 3V to 5V (ATA6561)
9288I-AUTO-09/14