|
ATA5567 Datasheet, PDF (1/36 Pages) ATMEL Corporation – Multifunctional 330-bit Read/Write RF Identification IC | |||
|
Features
⢠Contactless Read/Write Data Transmission
⢠Radio Frequency fRF from 100 kHz to 150 kHz
⢠e5550, e5551, T5557 Binary Compatible
⢠Extended Mode
⢠Small Size, Configurable for ISO/IEC 11784/785 Compatibility
⢠75 pF On-chip Resonant Capacitor (Mask Option)
⢠7 à 32-bit EEPROM Data Memory Including 32-bit Password
⢠Separate 64-bit Memory for Traceability Data
⢠32-bit Configuration Register in EEPROM to Setup:
â Data Rate
⢠RF/2 to RF/128, Binary Selectable, or
⢠Fixed e5550 Data Rates
â Modulation/Coding
⢠FSK, PSK, Manchester, Bi-phase, NRZ
â Other Options
⢠Password Mode
⢠Max Block Feature
⢠Answer-On-Request (AOR) Mode
⢠Inverse Data Output
⢠Direct Access Mode
⢠Sequence Terminator(s)
⢠Write Protection (Through Lock-bit per Block)
⢠Fast Write Method (5 Kbps versus 2 Kbps)
⢠OTP Functionality
⢠POR Delay up to 67 ms
Multifunctional
330-bit
Read/Write RF
Identification IC
ATA5567
1. Description
The ATA5567 is a contactless R/W IDentification IC (IDIC®) for applications in the
125-kHz frequency range. A single coil, connected to the chip, serves as the ICâs
power supply and bi-directional communication interface. The antenna and chip
together form a transponder or tag.
The on-chip 330-bit EEPROM (10 blocks, 33 bits each) can be read and written block-
wise from a reader. Block 0 is reserved for setting the operation modes of the
ATA5567 tag. Block 7 may contain a password to prevent unauthorized writing.
Data is transmitted from the IDIC using load modulation. This is achieved by damping
the RF field with a resistive load between the two terminals Coil 1 and Coil 2. The IC
receives and decodes 100% amplitude-modulated (OOK) pulse-interval-encoded bit
streams from the base station or reader.
4874FâRFIDâ07/08
|
▷ |