ATA3741 Datasheet, PDF (1/31 Pages) ATMEL Corporation – UHF ASK Receiver IC

Features
• Minimal External Circuitry Requirements, No RF Components on the PC Board Except
Matching to the Receiver Antenna
• High Sensitivity, Especially at Low Data Rates
• Sensitivity Reduction Possible Even While Receiving
• Fully Integrated VCO
• Low Power Consumption Due to Configurable Self Polling with a Programmable Time
Frame Check
• Supply Voltage 4.5V to 5.5V
• Operating Temperature Range –40°C to +105°C
• Single-ended RF Input for Easy Adaptation to λ / 4 Antenna or Printed Antenna on PCB
• Low-cost Solution Due to High Integration Level
• ESD Protection According to MIL-STD. 883 (4 KV HBM) Except Pin POUT (2 KV HBM)
• High Image Frequency Suppression due to 1 MHz IF in Conjunction with a SAW
Front-end Filter
– Up to 40 dB is Thereby Achievable with Newer SAWs
• Programmable Output Port for Sensitivity Selection or for Controlling External
Periphery
• Communication to the Microcontroller Possible via a Single, Bi-directional Data Line
• Power Management (Polling) is also Possible by Means of a Separate Pin via the
Microcontroller
• 2 Different IF Bandwidth Versions are Available (300 kHz and 600 kHz)
UHF ASK
Receiver IC
ATA3741
1. Description
The ATA3741 is a multi-chip PLL receiver device supplied in an SO20 package. It has
been specially developed for the demands of RF low-cost data transmission systems
with low data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in
Manchester or Bi-phase code. The receiver is well-suited to operate with Atmel's PLL
RF transmitter U2741B. Its main applications are in the areas of telemetering, security
technology, and keyless-entry systems. It can be used in the frequency receiving
range of f₀ = 300 MHz to 450 MHz for ASK or FSK data transmission. All the state-
ments made below refer to 433.92-MHz and 315-MHz applications.
4899B–RKE–10/06