AT93C86A_14 Datasheet, PDF (1/17 Pages) ATMEL Corporation – 3-wire Automotive Temperature Serial EEPROM

AT93C86A
3-wire Automotive Temperature Serial EEPROM
16K (2,048 x 8 or 1,024 x 16)
DATASHEET
Features
 Medium-voltage and Standard-voltage Operation
̶ 2.7 (V_CC = 2.7V to 5.5V)
 Automotive Temperature Range -40C to +125C
 User Selectable Internal Organization
̶ 16K: 2,048 x 8 or 1,024 x 16
 3-wire Serial Interface
 Sequential Read Operation
 Schmitt Trigger, Filtered Inputs for Noise Suppression
 2MHz Clock Rate (5V) Compatibility
 Self-timed Write Cycle (10ms max)
 High Reliability
̶ Endurance: 1,000,000 Write Cycles
̶ Data Retention: 100 Years
 Lead-Free/Halogen-Free Devices Available
 8-lead JEDEC SOIC and 8-lead TSSOP Packages
Description
The AT93C86A provides 16,384 bits of Serial Electrically Erasable Programmable
Read-Only Memory (EEPROM), organized as 1,024 words of 16 bits each when
the ORG pin is connected to V_CC and 2,048 words of 8 bits each when it is tied to
ground. The device is optimized for use in many automotive applications where
low-power and low-voltage operations are essential. The AT93C86A is available
in space saving 8-lead JEDEC SOIC and 8-lead TSSOP packages.
The AT93C86A is enabled through the Chip Select pin (CS), and accessed via a
3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift
Clock (SK). Upon receiving a READ instruction at DI, the address is decoded and
the data is clocked out serially on the data output pin DO. The write cycle is
completely self-timed and no separate erase cycle is required before Write. The
write cycle is only enabled when the part is in the Erase/Write Enable state. When
CS is brought “high” following the initiation of a write cycle, the DO pin outputs the
Ready/Busy status of the part. The AT93C86A is available in a 2.7V to 5.5V
version.
Atmel-5096F-SEEPROM-AT93C86A-Automotive-Datasheet_102014