AT93C46B Datasheet, PDF (1/10 Pages) ATMEL Corporation – 3-Wire Serial E2PROMs

AT93C46B
Features
• x16 Organization Utilizing “No Connects” for Pins 6 and 7
• Low Voltage and Standard Voltage Operation
– 5.0 (V_CC = 4.5V to 5.5V)
– 2.7 (V_CC = 2.7V to 5.5V)
– 2.5 (V_CC = 2.5V to 5.5V)
• 3-Wire Serial Interface
• 2 MHz Clock Rate (5V) Compatibility
• Self-Timed Write Cycle (10 ms max)
• High Reliability
– Endurance: 1 Million Cycles
– Data Retention: 100 Years
• Automotive Grade and Extended Temperature Devices Available
• 8-Pin PDIP and JEDEC SOIC Packages
Description
The AT93C46B provides 1024 bits of serial electrically erasable programmable read
only memory (EEPROM) organized as 64 words of 16 bits each. The device is opti-
mized for use in many industrial and commercial applications where low power and
low voltage operation are essential. The AT93C46B is available in space saving 8-pin
PDIP and 8-pin JEDEC packages.
The AT93C46B is enabled through the Chip Select pin (CS), and accessed via a 3-
wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock
(SK). Upon receiving a READ instruction at DI, the address is decoded and the data is
clocked out serially on the data output pin DO. The WRITE cycle is completely self-
timed and no separate ERASE cycle is required before WRITE. The WRITE cycle is
only enabled when the part is in the ERASE/WRITE ENABLE state. When CS is
brought “high” following the initiation of a WRITE cycle, the DO pin outputs the
READY/BUSY status of the part.
The AT93C46B is available in 4.5V to 5.5V, 2.7V to 5.5V, and 2.5V to 5.5V versions.
3-Wire
Serial
E²PROMs
1K (64 x 16)
AT93C46B
Pin Configuration
Pin Name
CS
SK
DI
DO
GND
V_CC
NC
Function
Chip Select
Serial Data Clock
Serial Data Input
Serial Data Output
Ground
Power Supply
No Connect
8-Pin PDIP
CS 1
SK 2
DI 3
DO 4
8 VCC
7 NC
6 NC
5 GND
8-Pin SOIC
CS ¹
SK ²
DI ³
SO ⁴
8 _VCC
7 _NC
6 _NC
5 _GND
0917A-A–11/97
1