|
AT90SC13668RU Datasheet, PDF (1/3 Pages) ATMEL Corporation – Secure Microcontroller for Smart Cards | |||
|
Features
General
⢠High-performance, Low-power secureAVR⢠Enhanced RISC Architecture
â 135 Powerful Instructions (Most Executed in a Single Clock Cycle)
⢠Low Power Idle and Power-down Modes
⢠Bond Pad Locations Conforming to ISO 7816-2
⢠ESD Protection to ± 4000V
⢠Operating Ranges: 1.62 to 5.5V
⢠Compliant with GSM, 3GPP and EMV 2000 Specifications
⢠Available in Wafers, Modules, and Industry-standard Packages
Memory
⢠136K Bytes of ROM Program Memory
⢠68K Bytes of EEPROM, Including 128 OTP Bytes and 384-byte Bit-addressable Bytes
â 1 to 128-byte Program / Erase
â 1ms Program / 1ms Erase
â Typically 500,000 Write/Erase Cycles at a Temperature of 25oC(Please refer to
Atmel Smartcard Reliability Manual)
â 10 Years Data Retention
⢠4K Bytes of RAM
Peripherals
⢠One ISO 7816 Controller
â Up to 625 kbps at 5 MHz
â Compliant with T=0 and T=1 Protocols
⢠One I/O Port
⢠Programmable Internal Oscillator (Up to 20 MHz for Internal CPU Clock)
⢠Two 16-bit Timers
⢠Random Number Generator (RNG)
⢠2-level Interrupt Controller
⢠Checksum Accelerator
⢠CRC 16 & 32 Engine (Compliant with ISO/IEC 3309)
Security
⢠Dedicated Hardware for Protection Against SPA/DPA Attacks
⢠Advanced Protection Against Physical Attack
⢠Environmental Protection Systems
⢠Voltage Monitor
⢠Frequency Monitor
⢠Secure Memory Management/Access Protection (Supervisor Mode)
Development Tools
⢠Voyager Emulation Platform (ATV4) to Support Software Development
⢠IAR Embedded Workbench® V4.20 Debugger or Atmelâs AVR Studio® Version 4.07 or
Above
⢠Software Libraries and Application Notes
Secure
Microcontroller
for Smart Cards
AT90SC
13668RU
Summary
6537ASâSCICâ20Nov06
Note: This is a summary document. A complete document will be
available under NDA. For more information, please contact your
local Atmel sales office.
|
▷ |