|
AT89C2051_08 Datasheet, PDF (1/19 Pages) ATMEL Corporation – 8-bit Microcontroller with 2K Bytes Flash | |||
|
Features
⢠Compatible with MCS®-51Products
⢠2K Bytes of Reprogrammable Flash Memory
â Endurance: 10,000 Write/Erase Cycles
⢠2.7V to 6V Operating Range
⢠Fully Static Operation: 0 Hz to 24 MHz
⢠Two-level Program Memory Lock
⢠128 x 8-bit Internal RAM
⢠15 Programmable I/O Lines
⢠Two 16-bit Timer/Counters
⢠Six Interrupt Sources
⢠Programmable Serial UART Channel
⢠Direct LED Drive Outputs
⢠On-chip Analog Comparator
⢠Low-power Idle and Power-down Modes
⢠Green (Pb/Halide-free) Packaging Option
8-bit
Microcontroller
with 2K Bytes
Flash
1. Description
The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microcomputer with
2K bytes of Flash programmable and erasable read-only memory (PEROM). The
device is manufactured using Atmelâs high-density nonvolatile memory technology
and is compatible with the industry-standard MCS-51 instruction set. By combining a
versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a power-
ful microcomputer which provides a highly-flexible and cost-effective solution to many
embedded control applications.
The AT89C2051 provides the following standard features: 2K bytes of Flash, 128
bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt
architecture, a full duplex serial port, a precision analog comparator, on-chip oscillator
and clock circuitry. In addition, the AT89C2051 is designed with static logic for opera-
tion down to zero frequency and supports two software selectable power saving
modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial
port and interrupt system to continue functioning. The power-down mode saves the
RAM contents but freezes the oscillator disabling all other chip functions until the next
hardware reset.
AT89C2051
0368HâMICROâ6/08
|
▷ |