English
Language : 

AT88RF04C Datasheet, PDF (1/11 Pages) ATMEL Corporation – 13.56 MHz CryptoRF EEPROM Memory 4 Kbits
Features
• One of a Family of Devices with User Memory of 4 Kbit to 64 Kbits
• Contactless 13.56 MHz RF Communications Interface
⎯ ISO/IEC 14443-2:2001 Type B Compliant
⎯ ISO/IEC 14443-3:2001 Type B Compliant Anticollision Protocol
⎯ Tolerant of Type A Signaling for Multiprotocol Applications
• Integrated 82 pF Tuning Capacitor
• User EEPROM Memory
⎯ 4 Kbits Configured as Four 128-byte (1-Kbit) User Zones
⎯ Byte, Page, and Partial Page Write Modes
⎯ Self-timed Write Cycle
• 256-byte (2-Kbit) Configuration Zone
⎯ User-programmable Application Family Identifier (AFI)
⎯ User-defined Anticollision Polling Response
⎯ User-defined Keys and Passwords
⎯ Read-Only Unique Die Serial Number
⎯ Secure Personalization Mode
• High-Security Features
⎯ Selectable Access Rights by Zone
⎯ 64-bit Mutual Authentication Protocol (under license of ELVA)
⎯ Encrypted Checksum
⎯ Stream Encryption using 64-bit Key
⎯ Four Key Sets for Authentication and Encryption
⎯ Four Sets of Two 24-bit Passwords
⎯ Password and Authentication Attempts Counters
⎯ Anti-tearing Function
⎯ Tamper Sensors
• High Reliability
⎯ Endurance: 100,000 Write Cycles
⎯ Data Retention: 10 Years
⎯ Operating Temperature: −40°C to +85°C
Description
The CryptoRF® family integrates a 13.56 MHz RF interface into a CryptoMemory®.
This product line is ideal for RF tags and contactless smart cards that can benefit
from advanced security and cryptographic features. This device is optimized as a
contactless secure memory for data storage without the requirement of an internal
microprocessor.
For communications, the RF interface utilizes the ISO/IEC 14443-2 and -3 Type B bit
timing and signal modulation schemes, and the ISO/IEC 14443-3 Slot-MARKER
Anticollision Protocol. Data is exchanged half duplex at a 106-kbit/s rate, with a two-
byte CRC_B providing error detection capability. The RF interface powers the other
circuits; no battery is required. Full compliance with the ISO/IEC 14443-2 and -3
standards and provides both a proven RF communication interface and a robust
anticollision protocol.
13.56 MHz
CryptoRF®
EEPROM Memory
4 Kbits
AT88RF04C
Summary
8672AS–CRRF–04/09