|
AT84CS001 Datasheet, PDF (1/8 Pages) ATMEL Corporation – 10-BIT 1:2/4 2.2GHz LVDS DMUX | |||
|
Features
⢠High-speed ADC Family Companion Chip
⢠Selectable 1:2 or 1:4 DMUX Ratio
⢠Power Consumption: 2.6W
⢠LVDS Compatible Differential Data and Clock Inputs (100⦠Terminated)
⢠LVDS Compatible Differential Data and Data Ready Outputs
⢠Staggered or Simultaneous Data Outputs
â 11th Bit = Ports A, B, C and D Clock in Staggered Mode
⢠Selectable Active Edge for Input and Output Clocks:
â Only Rising: CLK and DR Mode
â Rising and Falling: CLK/2 and DR/2 Mode
⢠Fine Tuning of Input Clock Path Delay
â Compensation of External Data and Clock Path Misalignment and Skews
â Once Tuned, Setting is Valid over Full Operating Frequency and Over Full
Specified Temperature Range
⢠Additional 11th Bit (Example: for Out-of-range Bit)
⢠Built-in Self Test (BIST)
⢠Stand-alone Tunable Delay Cell
⢠Power Supplies: VCCD = 3.3V (Digital), VPLUSD = 2.5V (Outputs)
⢠Power Consumption Reduction Mode: 1.1W
⢠EBGA240 Package
10-bit 1:2/4
2.2 GHz LVDS
DMUX
AT84CS001
Screening
⢠Temperature Range:
â -40° C < TC; TJ < 110° C (Industrial Grade)
Applications
This DMUX enables users to process high-speed output data streams from fast ana-
log-to-digital converters down to standard FPGA processor speed.
Summary
Description
The AT84CS001 is a monolithic high-speed demultiplexer, used to lower a 10-bit data
stream of up to 2.2 Gsps guaranteed rate by a selectable 4 or 2 ratio (a 1:8 ratio may
be achieved by interleaving two DMUXes).
The DMUX is a companion chip designed to fit perfectly with all of Atmelâs high-speed
ADCs and is capable of tracking the ADCâs output sampling rate over all operating fre-
quency and temperature ranges.
Thanks to its LVDS buffers, this DMUX can easily be interfaced with standard high-
speed FPGAs (100⦠differentially terminated).
The AT84CS001 has the same footprint as Atmelâs TS81102G0 DMUX, with a very
similar pinout. Minimum re-design efforts are required to use this low-power DMUX.
An application note âReplacing Atmelâs TS81102G0 DMUX with Atmelâs AT84CS001
LVDS DMUXâ reference 5413, is available to assist in migrating from the TS81102G0
to the AT84CS001.
5402ASâBDCâ11/04
This is a summary document. A complete document is not
available at this time. For more information, please contact
your local Atmel sales office.
|
▷ |