|
AT83C21GC Datasheet, PDF (1/5 Pages) ATMEL Corporation – GemCore Serial Lite PRO | |||
|
Features
⢠Smart Card Interface
â Compliance with Standards
⢠ISO/IEC 7816-1, 2, 3 and 4
⢠EMV V96
⢠CB
⢠Mondex®, Proton, ZKA, Other: Contact Gemplus®
â Supported Smart Cards
⢠Number of Smart Cards Supported: 1
⢠Asynchronous Cards: T=0 and T=1
⢠Synchronous/Memory Cards Using a Command Interpreter
⢠EMV or Non EMV Cards
⢠Electrical Interface
⢠Transmission Speed: 9.6 Kbps to 115 Kbps
⢠Card Power Supply: 1.8V/3V/5V
⢠ESD Protection On Card Pins: 4 KV - Human Body Model
⢠Card Presence or Insertion Detection
⢠Short Circuit Current Limitation
⢠Host Interface
â Physical Layer
⢠Serial Asynchronous Link
⢠Programmable Transmission Speed From 1,200 bps to 115,200 bps
⢠Format: 8 bits, No Parity, 1 Stop Bit
⢠Adjustable Signal Voltage
â Protocol
⢠Gemplus Block Protocol (GBP)
⢠GBP Interface Library Kit Source Code
⢠Chip Power Supply
â Voltage: VCC- 2.85V to 5.4V
â Consumption: 8 mA Typical, 150 mA Max - Smart Card Powered
â Power Down Mode
⢠100 µA Max Power Down Current
⢠Power-down/Power-up by Host Command
⢠Additional Features
â Operating Temperature Range: 0°C to +70°C (-40°C to +85°C)
â Package: SS0P24
â LED Management: The LED is On When the Card is Powered On
GemCore Serial
Lite PRO
AT83C21GC
Summary
Description
AT83C21GC is designed to simplify the integration of smart card interfaces in elec-
tronic devices.
It manages the electrical interface and communication with ISO 7816 â1/2/3/4 com-
patible smart cards and memory cards.
Figure 1. Basic Architecture of a Smart Card Reader
Host
Processor
AT83C21GC
Smart Card
Connector
Smart Card
Rev. 4247ASâSCRâ04/03
This is a summary Document. A complete document is
available on the Gemplus Web site. www.gemplus.com
1
|
▷ |