|
AT76C713_04 Datasheet, PDF (1/2 Pages) ATMEL Corporation – USB BRIDGE CONTROLLER | |||
|
AT76C713
USB BRIDGE CONTROLLER
A powerful 8-bit microcontroller that enables
bridging of USB to various types of devices.
T I M B E RW O L F SOLUTIONS
⢠Based on Atmelâs AVR® RISC Architecture, 130 Powerful Instructions
⢠Clock Generator Provides CPU Rates Up to 48 MHz
⢠One External Clock Crystal of 12 MHz Generates All the Required
System Clocks
⢠Full-speed USB Interface (12 Mbits/s) 2.0 Compliant
⢠Two On-chip 16550 UARTs, Each Supporting Baud Rates Up to 921 Kbaud
⢠On-chip Bootstrap ROM Provides a Variety of Firmware Upgrade Modes
⢠Programmable SPI Interface
⢠JTAG (IEEE Std. 1149.1 Compliant) Interface for Program Code Debug
⢠8 Kbytes x 16 bits (Up to 11 Kbytes x 16 bits), In-System SRAM for Program
Code (Program Memory)
⢠On-chip 8 Kbytes SRAM
⢠DMA Channels Allow Fast Data Transfers between End Point Buffers and
Internal or External SRAM
⢠Two 8-bit Timer/Counters and One 16-bit Timer/Counter
⢠Four External Interrupts through GPIOs
⢠Programmable Watchdog Timer
⢠Low-voltage operation: 1.8V Core, 3.3V I/O
|
▷ |