AT49BV160S Datasheet, PDF (1/5 Pages) ATMEL Corporation – 16-megabit(1M x 16) Secure 3-volt Only Memory

Features
• Single Voltage Read/Write Operation: 2.65V to 3.6V
• Access Time – 70 ns
• Sector Erase Architecture
– Thirty-one 32K Word (64K Bytes) Sectors with Individual Write Lockout
– Eight 4K Word (8K Bytes) Sectors with Individual Write Lockout
• Fast Word Program Time – 10 µs
• Typical Sector Erase Time: 32K Word Sectors – 700 ms; 4K Word Sectors – 100 ms
• Suspend/Resume Feature for Erase and Program
– Supports Reading and Programming from Any Sector by Suspending Erase
of a Different Sector
– Supports Reading Any Word by Suspending Programming of Any Other Word
• Low-power Operation
– 10 mA Active
– 15 µA Standby
• VPP Pin for Write Protection and Accelerated Program Operations
• RESET Input for Device Initialization
• Softlock Sector Protection
• Secure Lock and Freeze Feature
• Top or Bottom Boot Block Configuration Available
• 128-bit Protection Register
• Minimum 100,000 Erase Cycles
• Common Flash Interface (CFI)
• CBGA Green (Pb/Halide-free/RoHS Compliant) Packaging
1. Description
The AT49BV160S(T) is a 2.7-volt 16-megabit Flash memory organized as 1,048,576
words of 16 bits each. The memory is divided into 39 sectors for erase operations.
The device is offered in a 64-ball CBGA package. The device has CE and OE control
signals to avoid any bus contention. This device can be read or reprogrammed using
a single power supply, making it ideally suited for in-system programming.
In some applications, in addition to the standard softlock sector protection mecha-
nism, a requirement exists to allow for the permanent and irreversible locking of
selected regions in the memory. The AT49BV160S(T) allows the user to permanently
lock thirty-nine regions, and once activated these secure regions cannot be altered or
erased through Software or Hardware at any time. Once activated, no facility exists to
over-ride the secure lock mechanism. The size of each secure region is the same as
the sector size, and the location of these regions is determined by the Top or Bottom
Boot Block designation. The location of the secure regions is shown on page 3.
The secure regions can be locked in any sequence and at any time during normal
device operation. Read operations can still be performed on any region that has the
secure lock feature enabled. Full read and write operations, standard sector opera-
tions including standard Sector locking operations can be performed on all regions
that are not secure locked.
16-megabit
(1M x 16)
Secure
3-volt Only
Memory
AT49BV160S
AT49BV160ST
Summary
(Complete
Datasheet
under NDA)
NOTE: This is a summary document.
The complete document is available
under NDA. For more information,
please contact your local Atmel sales
office.
3560AS–FLASH–9/06