|
AT42QT2160_14 Datasheet, PDF (1/51 Pages) ATMEL Corporation – 16-key QMatrix Touch Sensor IC | |||
|
Atmel AT42QT2160
16-key QMatrix Touch Sensor IC
DATASHEET
Features
ï¬ Number of keys:
ï¬ up to 16 keys, and one slider (constructed from 2 to 8 keys)
ï¬ Technology:
ï¬ patented spread-spectrum charge-transfer (transverse mode)
ï¬ Number of I/O lines:
ï¬ 11 (3 dedicated â configurable for input or output, 8 shared â output only)
ï¬ PWM control for LED driving
ï¬ Key outline sizes:
ï¬ 6 mm à 6 mm or larger (panel thickness dependent); widely different sizes and
shapes possible
ï¬ Key spacings:
ï¬ 8 mm or wider, center to center (panel thickness dependent)
ï¬ Slider design:
ï¬ 2 to 8 keys placed in sequence, same design as keys
ï¬ Electrode design:
ï¬ two-part electrode shapes (drive-receive); wide variety of possible layouts
ï¬ PCB layers required:
ï¬ one layer (with jumpers), two layers (no jumpers)
ï¬ Electrode materials:
ï¬ PCB, FPCB, silver or carbon on film, ITO on film
ï¬ Panel materials:
ï¬ plastic, glass, composites, painted surfaces (low particle density metallic
paints possible)
ï¬ Adjacent metal:
ï¬ compatible with grounded metal immediately next to keys
ï¬ Panel thickness:
ï¬ up to 3 mm glass, 2.5 mm plastic (key size dependent)
ï¬ Key sensitivity:
ï¬ individually settable via simple commands over I2C-compatible interface
ï¬ Interface:
ï¬ I2C-compatible slave mode (100 kHz)
ï¬ Moisture tolerance:
ï¬ Increased moisture tolerance based on hardware design and firmware tuning
ï¬ Signal processing:
ï¬ self-calibration, auto drift compensation, noise filtering
ï¬ Adjacent Key Suppression® (AKS®) technology
ï¬ Applications:
ï¬ Laptop, mobile, consumer appliances, PC peripheral
ï¬ This datasheet is applicable to revision 4R0 chips only
ï¬ Operating Voltage:
ï¬ 1.8 V â 5.5 V
ï¬ Package:
ï¬ 28-pin 4 à 4 mm QFN RoHS compliant
9502CâAT42â09/2014
|
▷ |