|
AT42QT1481_14 Datasheet, PDF (1/73 Pages) ATMEL Corporation – 48-Key QMatrix FMEA IEC/EN60730 Touch Sensor IC | |||
|
Atmel AT42QT1481
48-Key QMatrix FMEA IEC/EN60730 Touch Sensor IC
DATASHEET
Features
ï¬ Number of keys:
ï¬ Up to 48
ï¬ Technology:
ï¬ Patented charge-transfer (transverse mode), with frequency hopping
ï¬ Key outline sizes:
ï¬ 6 mm à 6 mm or larger (panel thickness dependent); widely different sizes and
shapes possible
ï¬ Key spacings:
ï¬ 8 mm or wider, center to center (panel thickness dependent)
ï¬ Electrode design:
ï¬ Two-part electrode shapes (drive-receive); wide variety of possible layouts
ï¬ Layers required:
ï¬ One layer (with jumpers), two layers (no jumpers)
ï¬ Electrode materials:
ï¬ PCB, FPCB, silver or carbon on film, ITO on film
ï¬ Panel materials:
ï¬ Plastic, glass, composites, painted surfaces (low particle density metallic
paints possible)
ï¬ Adjacent Metal:
ï¬ Compatible with grounded metal immediately next to keys
ï¬ Panel thickness:
ï¬ Up to 50 mm glass, 20 mm plastic (key size dependent)
ï¬ Key sensitivity:
ï¬ Individually settable via simple commands over serial interface
ï¬ Signal processing:
ï¬ Self-calibration, auto drift compensation, noise filtering, Adjacent Key
Suppression®
ï¬ Interfaces:
ï¬ UART
ï¬ SPI slave (4 MHz maximum clock rate)
ï¬ STATUS indication pin
ï¬ Debug output
ï¬ FMEA compliant design features
ï¬ IEC/EN/UL60730 compliant design features
ï¬ UL approval
ï¬ VDE compliance
ï¬ For use in both class B and class C safety-critical products
9621EXâAT42â07/2014
|
▷ |