|
AT42QT1060_14 Datasheet, PDF (1/36 Pages) ATMEL Corporation – Six-channel QTouch Touch Sensor IC | |||
|
Atmel AT42QT1060
Six-channel QTouch® Touch Sensor IC
DATASHEET
Features
ï¬ Configurations:
ï¬ Can be configured as a combination of keys and input/output lines
ï¬ Number of QTouch® Keys:
ï¬ Two to six
ï¬ Number of I/O Lines:
ï¬ Seven, configurable for input or output, with PWM control for LED driving
ï¬ Technology:
ï¬ Patented spread-spectrum charge-transfer (direct mode)
ï¬ Key Outline Sizes:
ï¬ 6 mm x 6 mm or larger (panel thickness dependent); widely different sizes and
shapes possible
ï¬ Layers Required:
ï¬ One
ï¬ Electrode Materials:
ï¬ Etched copper
ï¬ Silver
ï¬ Carbon
ï¬ Indium Tin Oxide (ITO)
ï¬ Panel Materials:
ï¬ Plastic
ï¬ Glass
ï¬ Composites
ï¬ Painted surfaces (low particle density metallic paints possible)
ï¬ Panel Thickness:
ï¬ Up to 10 mm glass (electrode size dependent)
ï¬ Up to 5 mm plastic (electrode size dependent)
ï¬ Key Sensitivity:
ï¬ Individually settable via simple commands over serial interface
ï¬ Interface:
ï¬ I2C-compatible slave mode (100 kHz). Discrete detection outputs
ï¬ Moisture Tolerance:
ï¬ Increased moisture tolerance based on hardware design and firmware tuning
ï¬ Signal Processing:
ï¬ Self-calibration
ï¬ auto drift compensation
ï¬ noise filtering
ï¬ Adjacent Key Suppression® (AKS®)
ï¬ Applications:
ï¬ Mobile appliances
ï¬ Power:
ï¬ 1.8 V to 5.5 V
ï¬ Package:
ï¬ 28-pin 4 x 4 mm QFN RoHS compliant IC
9505GâAT42â05/2013
|
▷ |