|
AT30TS75_14 Datasheet, PDF (1/37 Pages) ATMEL Corporation – Digital Temperature Sensor | |||
|
NOT RECOMMENDED
FOR NEW DESIGNS
Replaced by
AT30TS74 and
AT30TS75A
AT30TS75
9- to 12-bit Selectable, ±0.5°C Accurate
Digital Temperature Sensor
DATASHEET
See Applicable Errata in Section 12.
Features
ï¬ Single 2.7V â 5.5V supply
ï¬ Measures temperature from -55ï°C to +125ï°C
ï¬ Highly accurate temperature measurements requiring no external components
ï¬ Â±1.0°C accuracy (typical) over the -5ï°C to +90ï°C range
ï¬ Â±2.0°C accuracy (typical) over the -20ï°C to +125ï°C range
ï¬ Â±3.0°C accuracy (typical) over the -40ï°C to +125ï°C range
ï¬ User-configurable resolution
ï¬ 9 to 12 bits (0.5ï°C to 0.0625ï°C)
ï¬ User-configurable high and low temperature limits
ï¬ ALERT output pin for indicating temperature alarms
ï¬ 2-wire I2C and SMBus⢠compatible serial interface
ï¬ Supports SMBus Timeout
ï¬ Supports SMBus Alert and Alert Response Address (ARA)
ï¬ Selectable addressing allows up to eight devices on the same bus
ï¬ I2C High-Speed (HS) mode compatible
ï¬ 3.4MHz maximum clock frequency
ï¬ Built-in noise suppression filtering for clock and data input signals
ï¬ Low power dissipation
ï¬ 75μA active current (typical) during temperature measurements
ï¬ Shutdown mode to minimize power consumption
ï¬ 1μA shutdown current (typical)
ï¬ One-shot mode for single temperature measurement while in Shutdown mode
ï¬ Pin and software compatible to industry-standard LM75-type devices
ï¬ Industry standard green (Pb/Halide-free/RoHS compliant) package options
ï¬ 8-lead SOIC (150-mil)
ï¬ 8-lead MSOP (3 x 3mm)
ï¬ 8-pad Ultra Thin DFN (UDFN - 2 x 3 x 0.6mm)
Atmel-8748E-DTS-AT30TS75-Datasheet_092013
|
▷ |