AT30TS75A_14 Datasheet, PDF (1/37 Pages) ATMEL Corporation – Digital Temperature Sensor

AT30TS75A
9- to 12-bit Selectable, ±0.5°C Accurate
Digital Temperature Sensor
DATASHEET
See Errata in Section 12.
Features
 Single 1.7V to 5.5V Supply
 Measures Temperature from -55C to +125C
 Highly Accurate Temperature Measurements Requiring No External Components
 ±0.5C Accuracy (Typical) Over the 0C to +85C Range
 ±1.0C Accuracy (Typical) Over the -25C to +105C Range
 ±2.0C Accuracy (Typical) Over the -40C to +125C Range
 User-configurable Resolution
 9 to 12 bits (0.5C to 0.0625C)
 User-configurable High and Low Temperature Limits
 ALERT Output Pin for Indicating Temperature Alarms
 2-wire I²C and SMBus^™ Compatible Serial Interface
 Supports SMBus Timeout
 Supports SMBus Alert and Alert Response Address (ARA)
 Selectable Addressing Allows up to Eight Devices on the Same Bus
 I²C High-Speed (HS) Mode Compatible
 3.4MHz Maximum Clock Frequency
 Built-in Noise Suppression Filtering for Clock and Data Input Signals
 Low Power Dissipation
 85μA Active Current (Typical) During Temperature Measurements
 Shutdown Mode to Minimize Power Consumption
 1μA Shutdown Current (Typical)
 One-Shot Mode for Single Temperature Measurement While in Shutdown Mode
 Pin and Software Compatible to Industry-standard LM75-type Devices
 Industry Standard Green (Pb/Halide-free/RoHS Compliant) Package Options
 8-lead SOIC (150-mil)
 8-lead MSOP (3 x 3mm)
 8-pad Ultra Thin DFN (UDFN — 2.0 x 3.0 x 0.6mm)
Atmel-8839I-DTS-AT30TS75A-Datasheet_102014