AT29BV010A Datasheet, PDF (1/10 Pages) ATMEL Corporation – 1 Megabit 128K x 8 Single 2.7-volt Battery-Voltage CMOS Flash

AT29BV010A
Features
Single Supply Voltage, Range 2.7V to 3.6V
• _{Single Supply for Read and Write}
• _{Software Protected Programming}
• _{Fast Read Access Time - 200 ns}
•• _{Low Power Dissipation}
15 mA Active Current
20 µA CMOS Standby Current
• Sector Program Operation
Single Cycle Reprogram (Erase and Program)
1024 Sectors (128 bytes/sector)
Internal Address and Data Latches for 128-Bytes
Two 8 KB Boot Blocks with Lockout
• _{Fast Sector Program Cycle Time - 20 ms Max.}
• _{Internal Program Control and Timer}
• _{DATA Polling for End of Program Detection}
• _{Typical Endurance > 10,000 Cycles}
• _{CMOS and TTL Compatible Inputs and Outputs}
•• _{Commercial and Industrial Temperature Ranges}
1 Megabit
(128K x 8)
Single 2.7-volt
Battery-Voltage^™
CMOS Flash
Description
The AT29BV010A is a 2.7-volt-only in-system Flash Programmable and Erasable
Read Only Memory (Flash). Its 1 megabit of memory is organized as 131,072 words
by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS EEPROM technol-
ogy, the device offers access times up to 200 ns, and a low 54 mW power dissipation.
When the device is deselected, the CMOS standby current is less than 20 µA. The
device endurance is such that any sector can typically be written to in excess of
10,000 times. The programming algorithm is compatible with other devices in Atmel’s
Low Voltage Flash family of products.
(continued)
Pin Configurations
Pin Name
A0 - A16
CE
OE
WE
I/O0 - I/O7
NC
Function
Addresses
Chip Enable
Output Enable
Write Enable
Data Inputs/Outputs
No Connect
PLCC Top View
AT29BV010A
TSOP Top View
Type 1
0519B
4-3