AT28LV256 Datasheet, PDF (1/10 Pages) ATMEL Corporation – 256K 32K x 8 Low Voltage CMOS E2PROM

AT28LV256
Features
Fast Read Access Time - 200 ns
•• Automatic Page Write Operation
Internal Address and Data Latches for 64-Bytes
Internal Control Timer
• Fast Write Cycle Times
Page Write Cycle Time: 10 ms Maximum
1 to 64-Byte Page Write Operation
• Low Power Dissipation
15 mA Active Current
20 µA CMOS Standby Current
Hardware and Software Data Protection
• _{DATA Polling for End of Write Detection}
•• _{High Reliability CMOS Technology}
Endurance: 10,000 Cycles
Data Retention: 10 Years
• Single 3.3V ± 5% Supply
JEDEC Approved Byte-Wide Pinout
•• _{Commercial and Industrial Temperature Ranges}
Description
The AT28LV256 is a high-performance Electrically Erasable and Programmable
Read Only Memory. Its 256K of memory is organized as 32,768 words by 8 bits.
Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers
access times to 200 ns with power dissipation of just 54 mW. When the device is
deselected, the CMOS standby current is less than 200 µA.
The AT28LV256 is accessed like a Static RAM for the read or write cycle without the
need for external components. The device contains a 64-byte page register to allow
writing of up to 64-bytes simultaneously. During a write cycle, the addresses and 1 to
Pin Configurations
(continued)
Pin Name
A0 - A14
Function
Addresses
PDIP, SOIC
Top View
CE
Chip Enable
OE
Output Enable
WE
Write Enable
I/O0 - I/O7 Data Inputs/Outputs
NC
No Connect
DC
Don’t Connect
256K (32K x 8)
Low Voltage
CMOS
E²PROM
AT28LV256
PLCC
Top View
TSOP
Top View
Note: PLCC package pins 1 and
17 are DON’T CONNECT.
0273E
2-145