AT27LV520_14 Datasheet, PDF (1/13 Pages) ATMEL Corporation – Dual Voltage Range Operation

Features
• 8-bit Multiplexed Addresses/Outputs
• Fast Read Access Time – 70 ns
• Dual Voltage Range Operation
– Low-voltage Power Supply Range, 3.0V to 3.6V, or
– Standard 5V ± 10% Supply Range
• Pin Compatible with Standard AT27C520
• Low-power CMOS Operation
– 20 µA Max Standby for ALE = V_IH and V_CC = 3.6V
– 29 mW Max Active at 5 MHz for V_CC = 3.6V
• JEDEC Standard Packages
– 20-lead TSSOP
– 20-lead SOIC
• High-reliability CMOS Technology
– 2,000V ESD Protection
– 200 mA Latch-up Immunity
• Rapid Programming Algorithm – 50 µs/Byte (Typical)
• CMOS- and TTL-compatible Inputs and Outputs
– JEDEC Standard for LVTTL
• Integrated Product Identification Code
• Industrial Temperature Range
• Green (Pb/Halide-free) Packaging Option
1. Description
The AT27LV520 is a low-power, high-performance, 524,288-bit one-time programma-
ble read-only memory (OTP EPROM) organized 64K by eight bits. It incorporates
latches for the eight lower order address bits to multiplex with the eight data bits. This
minimizes system chip count, reduces cost, and simplifies the design of multiplexed
bus systems. It requires only one power supply in the range of 3.0V to 3.6V for normal
read mode operation, making it ideal for fast, portable systems using battery power.
Any byte can be accessed in less than 70 ns.
The AT27LV520 is available in 20-lead TSSOP and 20-lead SOIC, one-time program-
mable (OTP) plastic packages.
Atmel’s innovative design techniques provide fast speeds that rival 5V parts while
keeping the low power consumption of a 3.3V supply. At V_CC = 3.0V, any byte can be
accessed in less than 70 ns. With a typical power dissipation of only 18 mW at 5 MHz
and V_CC = 3.3V, the AT27LV520 consumes less than one fifth the power of a standard
5V EPROM. Standby mode is achieved by asserting ALE high. Standby mode supply
current is typically less than 1 µA at 3.3V.
The AT27LV520 operating with V_CC at 3.0V produces TTL level outputs that are com-
patible with standard TTL logic devices operating at V_CC = 5.0V. The device is also
capable of standard 5-volt operation making it ideally suited for dual supply range
systems or card products that are pluggable in both 3-volt and 5-volt hosts.
512K (64K x 8)
Multiplexed
Addresses/
Outputs
Low-voltage
OTP EPROM
AT27LV520
Not Recommended
for New Designs.
0911G–EPROM–8/07