AT27C4096 Datasheet, PDF (1/9 Pages) ATMEL Corporation – 4-Megabit 256K x 16 OTP EPROM

AT27C4096
Features
• Fast Read Access Time - 55 ns
• Low Power CMOS Operation
– 100 µA Maximum Standby
– 40 mA Maximum Active at 5 MHz
• JEDEC Standard Packages
– 40-Lead 600 mil PDIP
– 44-Lead PLCC
– 40-Lead TSOP (10 mm x 14 mm)
• Direct Upgrade from 512K bit, 1M bit, and 2M bit
(AT27C516, AT27C1024, and AT27C2048) EPROMs
• 5V ± 10% Power Supply
• High Reliability CMOS Technology
– 2,000V ESD Protection
– 200 mA Latchup Immunity
• Rapid^™ Programming Algorithm - 50 µs/word (typical)
• CMOS and TTL Compatible Inputs and Outputs
• Integrated Product Identification Code
• Commercial and Industrial Temperature Ranges
Description
The AT27C4096 is a low-power, high-performance 4,194,304-bit one-time program-
mable read only memory (OTP EPROM) organized 256K by 16 bits. It requires a sin-
gle 5V power supply in normal read mode operation. Any word can be accessed in
less than 55 ns, eliminating the need for speed-reducing WAIT states. The by-16
organization makes this part ideal for high-performance 16- and 32-bit microprocessor
systems.
Pin Configurations
PDIP Top View
(continued)
Pin Name Function
A0 - A17 Addresses
O0 - O15 Outputs
CE
Chip Enable
OE
Output Enable
NC
Note:
No Connect
Both GND pins must be
connected.
4-Megabit
(256K x 16)
OTP EPROM
AT27C4096
PLCC Top View
TSOP Top View
Type 1
0311E-A–06/97
1