|
AT27BV4096 Datasheet, PDF (1/9 Pages) ATMEL Corporation – 4 Megabit 256K x 16 Unregulated Battery-Voltage High Speed OTP CMOS EPROM | |||
|
AT27BV4096
Features
Fast Read Access Time - 120 ns
â¢â¢ Dual Voltage Range Operation
Unregulated Battery Power Supply Range, 2.7V to 3.6V
or Standard 5V ± 10% Supply Range
Pin Compatible with JEDEC Standard AT27C4096
â¢â¢ Low Power CMOS Operation
20 µA max. (less than 1 µA typical) Standby for VCC = 3.6V
29 mW max. Active at 5 MHz for VCC = 3.6V
⢠JEDEC Standard Surface Mount Packages
44-Lead PLCC
40-Lead TSOP (10 x 14mm)
⢠High Reliability CMOS Technology
2,000V ESD Protection
200 mA Latchup Immunity
⢠Rapid⢠Programming algorithm - 100 µs/word (typical)
⢠CMOS and TTL Compatible Inputs and Outputs
JEDEC Standard for LVTTL and LVBO
Integrated Product Identification Code
â¢â¢ Commercial and Industrial Temperature Ranges
Description
The AT27BV4096 is a high performance, low power, low voltage 4,194,304 bit one-
time programmable read only memory (OTP EPROM) organized as 256K by 16 bits.
It requires only one supply in the range of 2.7V to 3.6V in normal read mode opera-
tion. The by-16 organization makes this part ideal for portable and handheld 16 and
32 bit microprocessor based systems using either regulated or unregulated battery
power.
(continued)
4 Megabit
(256K x 16)
Unregulated
Battery-Voltageâ¢
High Speed
OTP
CMOS EPROM
Pin Configurations
Pin Name Function
A0 - A17 Addresses
O0 - O15 Outputs
CE
Chip Enable
OE
Output Enable
NC
No Connect
Note: Both GND pins must be
connected.
AT27BV4096
PLCC Top View
TSOP Top View
Type 1
Note: 1. PLCC package pins 1 and 23
are DONâT CONNECT.
0640A
3-63
|
▷ |