AT27BV040_14 Datasheet, PDF (1/13 Pages) ATMEL Corporation – Dual voltage range operation

Features
• Fast read access time – 120ns
• Dual voltage range operation
– Unregulated battery power supply range, 2.7V to 3.6V, or
– Standard power supply range, 5V  10%
• Compatible with JEDEC standard Atmel^® AT27C040
• Low-power CMOS operation
– 20µA max standby (less than 1µA, typical) for V_CC = 3.6V
– 36mW max active at 5MHz for V_CC = 3.6V
• JEDEC standard packages
– 32-lead PLCC
– 32-lead TSOP
• High-reliability CMOS technology
– 2,000V ESD protection
– 200mA latchup immunity
• Rapid programming algorithm – 100µs/byte (typical)
• CMOS- and TTL-compatible inputs and outputs
– JEDEC standard for LVTTL and LVBO
• Integrated product identification code
• Industrial temperature range
• Green (Pb/halide-free, RoHS compliant) packaging
1. Description
The Atmel AT27BV040 chip is a high-performance, low-power, low-voltage, 4,194,304-bit,
one-time programmable, read only memory (EPROM) organized as 512K by 8 bits. It
requires only one supply in the range of 2.7 to 3.6V in normal read mode operation, making
it ideal for fast, portable systems using either regulated or unregulated battery power.
The Atmel innovative design techniques provide fast speeds that rival 5V parts, while keep-
ing the low power consumption of a 3V supply. At V_CC = 2.7V, any byte can be accessed in
less than 100ns. With a typical power dissipation of only 18mW at 5MHz and V_CC = 3V, the
AT27BV040 consumes less than one-fifth the power of a standard, 5V EPROM. Standby
mode supply current is typically less than 1µA at 3V. The AT27BV040 simplifies system
design and stretches battery lifetime even further by eliminating the need for power supply
regulation.
The AT27BV040 is available in industry-standard, JEDEC-approved, one-time programma-
ble (OTP) PLCC and plastic TSOP packages. All devices feature two-line control (CE, OE)
to give designers the flexibility to prevent bus contention.
The AT27BV040 operating with V_CC at 3.0V produces TTL-level outputs that are compatible
with standard TTL logic devices operating at V_CC = 5.0V. At V_CC = 2.7V, the part is compati-
ble with JEDEC-approved, low-voltage battery operation (LVBO) interface specifications.
The device is also capable of standard, 5V operation, making it ideally suited for dual supply
range systems or card products that are pluggable in both 3V and 5V hosts.
The Atmel AT27BV040 has additional features to ensure high quality and efficient produc-
tion use. The rapid programming algorithm reduces the time required to program the part
and guarantees reliable programming. Programming time is typically only 100µs/byte. The
4Mb (512K x 8)
Unregulated Battery
Voltage, High-speed,
One-time
Programmable, Read
Only Memory
Atmel AT27BV040
Not recommended for
new designs
0346H–EPROM–4/11