AT25F2048 Datasheet, PDF (1/17 Pages) ATMEL Corporation – SPI Serial Memory 2M (262,144 x 8)

Features
• Serial Peripheral Interface (SPI) Compatible
• Supports SPI Modes 0 (0,0) and 3 (1,1)
• 20 MHz Clock Rate
• Byte Mode and 256-byte Page Mode for Program Operations
• Sector Architecture:
– Four Sectors with 64K Bytes Each
– 256 Pages per Sector
• Product Identification Mode
• Low-voltage Operation
– 2.7 (V_CC = 2.7V to 3.6V)
• Sector Write Protection
– Protect 1/4, 1/2 or Entire Array
• Write Protect (WP) Pin and Write Disable Instructions for
both Hardware and Software Data Protection
• Self-timed Program Cycle (30 µs/Byte Typical)
• Self-timed Sector Erase Cycle (1 second/Sector Typical)
• Single Cycle Reprogramming (Erase and Program) for Status Register
• High Reliability
– Endurance: 10,000 Write Cycles Typical
• 8-lead JEDEC SOIC
Description
The AT25F2048 provides 2,097,152 bits of serial reprogrammable Flash memory
organized as 262,144 words of 8 bits each. The device is optimized for use in many
industrial and commercial applications where low-power and low-voltage operation
are essential. The AT25F2048 is available in a space-saving 8-lead JEDEC SOIC
package.
SPI Serial
Memory
2M (262,144 x 8)
AT25F2048
Preliminary
Pin Configurations
Pin Name
CS
Function
Chip Select
SCK
SI
SO
Serial Data Clock
Serial Data Input
Serial Data Output
GND
VCC
WP
HOLD
Ground
Power Supply
Write Protect
Suspends Serial Input
8-lead SOIC
CS 1
SO 2
WP 3
GND 4
8 VCC
7 HOLD
6 SCK
5 SI
Rev. 2455D–SEEPR–7/04
1