|
AT24MAC402 Datasheet, PDF (1/28 Pages) ATMEL Corporation – I2C-Compatible (2-wire) 2-Kbit Serial EEPROM | |||
|
Atmel AT24MAC402 and AT24MAC602
I2C-Compatible (2-wire) 2-Kbit Serial EEPROM with a
Factory-Programmed EUI-48⢠or EUI-64â¢Address
Plus an Embedded Unique 128-bit Serial Number
2-Kbit (256 x 8)
PRELIMINARY DATASHEET
Standard Serial EEPROM Features
ï¬ Low-voltage operation
ï¬ 1.7V Minimum (VCC = 1.7V to 5.5V)
ï¬ Internally organized as 256 x 8 (2K)
ï¬ I2C-compatible (2-wire) serial interface
ï¬ Schmitt Trigger, filtered inputs for noise suppression
ï¬ Bi-directional data transfer protocol
ï¬ 400kHz (1.7V) and 1MHz (2.5V, 5.0V) compatibility
ï¬ Write Protect pin for hardware data protection of the entire array
ï¬ Permanent and Reversible Software Write Protection for the first-half of the array
ï¬ Software procedure to verify write protect status
ï¬ 16-byte page write modes
ï¬ Partial page writes allowed
ï¬ Self-timed write cycle (5ms max)
ï¬ High-reliability
ï¬ Endurance: 1,000,000 write cycles
ï¬ Data retention: 100 years
ï¬ Green package options (PB/Halide-free/RoHS compliant)
ï¬ 8-lead JEDEC SOIC, 8-lead TSSOP, 8-pad UDFN, and 5-lead SOT23
ï¬ Die sale options: wafer form and tape and reel
Enhanced Features in the MAC Serial EEPROM Family
ï¬ Factory-programmed EUI-48 or EUI-64 compatible address
ï¬ Permanently locked, read-only value
ï¬ Stored in a separate memory area
ï¬ Guaranteed unique EUI address
ï¬ Custom programming services available
ï¬ Manage and program customerâs IEEE assigned OUI
ï¬ Unique factory-programmed 128-bit serial number
ï¬ Unique for all Atmel® AT24CS, AT93CS, and AT25S series Serial EEPROMs
ï¬ Permanently locked, read-only value
ï¬ Stored in a separate memory area
8807AâSEEPRâ6/12
|
▷ |