|
AT24HC04B Datasheet, PDF (1/19 Pages) ATMEL Corporation – Two-wire Serial EEPROM 4K (512 x 8) | |||
|
Features
⢠Write Protect Pin for Hardware Data Protection
â Utilizes Different Array Protection Compared to the AT24C04B
⢠Low-voltage and Standard-voltage Operation
â 1.8 (VCC = 1.8V to 5.5V)
⢠Internally Organized 512 x 8 (4K)
⢠Two-wire Serial Interface
⢠Schmitt Trigger, Filtered Inputs for Noise Suppression
⢠Bidirectional Data Transfer Protocol
⢠1 MHz (5V) and 400 kHz (1.8V, 2.5V, 2.7V) Clock Rate
⢠16-byte Page
⢠Partial Page Writes Allowed
⢠Self-timed Write Cycle (5 ms Max)
⢠High Reliability
â Endurance: One Million Write Cycles
â Data Retention: 100 Years
⢠8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages
⢠Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
Two-wire Serial
EEPROM
4K (512 x 8)
AT24HC04B
Description
The AT24HC04B provides 4096 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 512 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24HC04B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a
two-wire serial interface. In addition, the entire family is available in 1.8V (1.8V to
5.5V) version.
Table 0-1.
Pin Name
Pin Configuration
Function
8-lead TSSOP
A1, A2
SDA
SCL
Address Inputs
Serial Data
Serial Clock Input
NC 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
WP
Write Protect
NC
No-connect
8-lead PDIP
NC 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
8-lead SOIC
NC 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
5227EâSEEPRâ11/08
|
▷ |