AT24HC02B_14 Datasheet, PDF (1/19 Pages) ATMEL Corporation – 2-wire Automotive Temperature Serial EEPROM

1. Features
• Write Protect Pin for Hardware Data Protection
– Utilizes Different Array Protection Compared to the AT24C02B
• Low-voltage and Standard-voltage Operation
– 1.8 (V_CC = 1.8V to 5.5V)
• Internally Organized 256 x 8 (2K)
• Two-wire Serial Interface
• Schmitt Trigger, Filtered Inputs for Noise Suppression
• Bidirectional Data Transfer Protocol
• 1 MHz (5V) and 400 kHz (1.8V, 2.5V, 2.7V) Clock Rate
• 8-byte Page
• Partial Page Writes Allowed
• Self-timed Write Cycle (5 ms Max)
• High Reliability
– Endurance: One Million Write Cycles
– Data Retention: 100 Years
• 8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP Packages
• Die Sales: Wafer Form, Tape and Reel, and Bumped Wafers
Two-wire Serial
EEPROM
2K (256 x 8)
AT24HC02B
2. Description
The AT24HC02B provides 2048 bits of serial electrically erasable and programmable
read-only memory (EEPROM) organized as 256 words of 8 bits each. The device is
optimized for use in many industrial and commercial applications where low-power
and low-voltage operation are essential. The AT24HC02B is available in space-saving
8-lead PDIP, 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a
two-wire serial interface. In addition, the entire family is available in 1.8V (1.8V to
5.5V) version.
Table 2-1. Pin Configuration
Pin Name
A0–A2
SDA
SCL
WP
Function
Address Inputs
Serial Data
Serial Clock Input
Write Protect
8-lead TSSOP
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
8-lead PDIP
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
Not Recommended
for New Design.
Replaced by
AT24HC02C.
8-lead SOIC
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
Rev. 5134E–SEEPR–3/08