|
AT24C32_03 Datasheet, PDF (1/19 Pages) ATMEL Corporation – 2-Wire Serial EEPROM | |||
|
Features
⢠Low-Voltage and Standard-Voltage Operation
â 2.7 (VCC = 2.7V to 5.5V)
â 1.8 (VCC = 1.8V to 5.5V)
⢠Low-Power Devices (ISB = 2 µA at 5.5V) Available
⢠Internally Organized 4096 x 8, 8192 x 8
⢠2-Wire Serial Interface
⢠Schmitt Trigger, Filtered Inputs for Noise Suppression
⢠Bidirectional Data Transfer Protocol
⢠100 kHz (1.8V, 2.5V, 2.7V) and 400 kHz (5V) Clock Rate
⢠Write Protect Pin for Hardware Data Protection
⢠32-Byte Page Write Mode (Partial Page Writes Allowed)
⢠Self-Timed Write Cycle (10 ms max)
⢠High Reliability
â Endurance: 1 Million Write Cycles
â Data Retention: 100 Years
⢠Automotive Grade and Extended Temperature Devices Available
⢠8-Pin JEDEC PDIP, 8-Pin JEDEC SOIC, 8-Pin EIAJ SOIC,
and 8-pin TSSOP Packages
Description
The AT24C32/64 provides 32,768/65,536 bits of serial electrically erasable and pro-
grammable read only memory (EEPROM) organized as 4096/8192 words of 8 bits
each. The deviceâs cascadable feature allows up to 8 devices to share a common 2-
wire bus. The device is optimized for use in many industrial and commercial applica-
tions where low power and low voltage operation are essential. The AT24C32/64 is
available in space saving 8-pin JEDEC PDIP, 8-pin JEDEC SOIC, 8-pin EIAJ SOIC,
and 8-pin TSSOP (AT24C64) packages and is accessed via a 2-wire serial interface.
In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V)
versions.
2-Wire
Serial EEPROM
32K (4096 x 8)
64K (8192 x 8)
AT24C32
AT24C64
Pin Configurations
Pin Name
A0 - A2
SDA
SCL
WP
Function
Address Inputs
Serial Data
Serial Clock Input
Write Protect
8-Pin PDIP
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
8-Pin TSSOP
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
8-Pin SOIC
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
2-Wire, 32K
Serial E2PROM
Rev. 0336KâSEEPRâ7/03
1
|
▷ |