|
AT24C32A_14 Datasheet, PDF (1/18 Pages) ATMEL Corporation – Schmitt Trigger, Filtered Inputs for Noise Suppression | |||
|
Features
⢠Standard-Voltage Operation
â 2.7 (VCC = 2.7V to 5.5V)
⢠Internally Organized 4096 x 8 (32K), 8192 x 8 (64K)
⢠Automotive Temperature Range â40ï°C to +125ï°C
⢠Two-wire Serial Interface
⢠Schmitt Trigger, Filtered Inputs for Noise Suppression
⢠Bidirectional Data Transfer Protocol
⢠400 kHz Clock Rate
⢠Write Protect Pin for Hardware Data Protection
⢠32-byte Page Write Mode (Partial Page Writes Allowed)
⢠Self-timed Write Cycle (5 ms Max)
⢠High Reliability
â Endurance: 1 Million Write Cycles
â Data Retention: 100 Years
⢠Lead-free/Halogen-free Devices Available
⢠8-lead JEDEC SOIC and 8-lead TSSOP Packages
Description
The AT24C32A/64A provides 32,768/65,536 bits of serial electrically erasable and
programmable read only memory (EEPROM) organized as 4096/8192 words of 8 bits
each. The deviceâs cascadable feature allows up to 8 devices to share a common two-
wire bus. The device is optimized for use in many automotive applications where low
power and low voltage operation are essential. The AT24C32A/64A is available in
space saving 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via
a 2-wire serial interface and is available in a 2.7V (2.7V to 5.5V) version.
Table 1. Pin Configuration
Pin Name Function
A0 â A2
Address Inputs
SDA
Serial Data
SCL
Serial Clock Input
WP
Write Protect
8-lead SOIC
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
8-lead TSSOP
A0 1
A1 2
A2 3
GND 4
8 VCC
7 WP
6 SCL
5 SDA
Two-wire
Automotive
Serial EEPROM
32K (4096 x 8)
64K (8192 x 8)
AT24C32A(1)
AT24C64A
1. AT24C32A not recommended for
new design; replaced by
AT24C32D Automotive.
2. AT24C64A not recommended for
new design; replaced by
AT24C64D Automotive.
5120DâSEEPRâ6/08
|
▷ |