PT65 Datasheet, PDF (2/6 Pages) List of Unclassifed Manufacturers – Rotary code switches

65W Triple Output Switching Power Supply
PT65 series
INPUT SPECIFICATIONS
Input Voltage Range
90-264VAC / 127-370 Volts(DC)
Frequency Range
47-440 Hz: PT-65A/B/C/D

47~63Hz: PT6503
Inrush Current, typ: (cold start) 20 Amps @ 115VAC

40Amps @ 230VAC
Input Current
PT-65A/B/C/D
1.5Amps max @115VAC
PT-6503
1.8Amps max @115VAC
PT-65A/B/C/D/03
0.7 Amps max @ 230VAC
Leakage current
PT-65A/B/C/D
< 0.5mAmps
PT-6503
< 1mAmps /240VAC
OUTPUT SPECIFICATIONS
Voltage and Current
See Selection Chart
Line Regulation
See Selection Chart
Load Regulation
See Selection Chart
Voltage Tolerance (Note 2)
See Selection Chart
Ripple/Noise (Note 1)
See Selection Chart
Hold Up Time @ FL
60mS
Setup, Rise Time @ FL
800mS, 20mS PT-65A/B/C/D

800mS, 50mS PT-6503
Over Voltage Protection
5Volts(DC) only: 5.75~6.75Volts(DC)

Hiccup mode, auto recover
Over Current Protection
Hiccup mode, auto recover
PT-65A/B/C
73~95W rated output power
PT-65D
74.8~98.6W rated output power
PT-6503
120-160% rated output power
DC Voltage Adjust
4.75~5.5Volts(DC):PT-65A/B/C/D(5V)

3~3.6Volts(DC): PT-6503(3.3Volts)
GENERAL SPECIFICATIONS
Safety


Insulation Resistance
EMI

UL60950-1 (PT-65A/B/C/D)
UL1950 (only PT-65003)
TUV EN60950-1 Approved
≥ 100MΩ / 500Volts(DC)
Compliance to EN55022 (CISPR22)
Class B
Harmonic Current
Compliance to EN61000-3-2,-3
Efficiency
See Selection Chart
Isolation

3000VAC Input - Output

1500VAC Input - Ground

500VAC Output - Ground 1min
EMS
Compliance to

EN61000-4-2,3,4,5,6,8,11;

ENV50204, EN55024

light inustry level, criteria A
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
-10°C to +60°C (See Derate Curve)
Storage Temperature
-20°C to +85°C, 10~95% RH
Relative Humidity
20 to +90% RH
Temperature Coefficient
PT-65A/B/C/D ±0.04% / °C (0-50°C) on +5Volts output
PT-6503 ±0.03% / °C (0-50°C)
MTBF

PT-65A/B/C/D
277.2K Hrs min, MIL-HDBK-217F (25°C)
PT-6503
222K Hrs min, MIL-HDBK-217F (25°C)
Vibration
10~500Hz, 2G10min./1cycle, period for
60min. each along X, Y, Z axes
PHYSICAL SPECIFICATIONS
Size
Millimeters
127 x 76.2 x 42
Inches
5” x 3” x 1.6”
Weight
PT-65A/B/C/D
8.82 oz (250g)
PT-6503
9.87 oz (280g)
NOTE
1. Ripple and Noise are measured at 20MHz of bandwidth by using a
12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
2. Tolerance: includes set up tolerance, line regulation and load regula-
tion.
3. Mounting holes M1 and M2 should be grounded for EMI purposes.
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458