PD65 Datasheet, PDF (2/4 Pages) Tumbler Technologies + TRUMPower – 50-65 WATT DC TO DC CONVERTERS

65W Dual Output Switching Power Supply
PD65 series
INPUT SPECIFICATIONS
Input Voltage Range
Frequency Range
Inrush Current, typ: (cold start)
Input Current

Leakage Current
90-264VAC / 127-370 Volts(DC)
47~440Hz
20 Amps/ 115VAC; 40Amps/230VAC
1.5 Amps max @115VAC
0.9 Amps max @ 230VAC
< 0.75mAmps
OUTPUT SPECIFICATIONS
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature
-10°C to +60°C (See Derate Curve)
Storage Temperature
-20°C to +85°C, 10~95% RH
Relative Humidity
20 to +90% RH
Temperature Coefficient ±0.04% / °C (0-50°C) ON +5V output
MTBF
288.1K Hrs min, MIL-HDBK-217F (25°C)
Vibration
10~500Hz, 2G10min./1cycle, period for
60min. each along X, Y, Z axes
Voltage and Current
Line Regulation
Load Regulation
Voltage Tolerance (Note 2)
Ripple/Noise (Note 1)
Hold Up Time @ FL
Setup, Rise Time @ FL
Over Voltage Protection

Over Current Protection

DC Voltage Adjust
See Selection Chart
See Selection Chart
See Selection Chart
See Selection Chart
See Selection Chart
60mS @ FL
800mS, 20mS @ FL
5Volts(DC) only: 5.75~6.75Volts(DC)
Hiccup mode, auto recover
73~105W rated output power
Hiccup mode, auto recover
4.75~5.5Volts(DC): 5Volts(DC) only
GENERAL SPECIFICATIONS
PHYSICAL SPECIFICATIONS
Size
Millimeters
127 x 76 x 42
Inches
5” x 2.99” x 1.65”
Weight
8.47 oz (240g)
NOTE
1. Ripple and Noise are measured at 20MHz of bandwidth by using a
12” twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor.
2. Tolerance: includes set up tolerance, line regulation and load regula-
tion.
3.Mounting holes M1 and M2 should be grounded for EMI purposes.
Safety
UL60950-1

TUV EN60950-1 Approved
Insulation Resistance
≥ 100MΩ / 500Volts(DC)
EMI
Compliance to EN55022 (CISPR22)

Class B
Harmonic Current
Compliance to EN61000-3-2,-3
Efficiency
See Selection Chart
Isolation
3000VAC Input - Output
1500VAC Input - Ground
500VAC Output - Ground
EMS Compliance to
EN61000-4-2,3,4,5,6,8,11
ENV50204, EN55024
light industry level, criteria A
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
WWW.ASTRODYNETDI.COM
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458