MPU12A Datasheet, PDF (2/3 Pages) Astrodyne Corporation – 12W Medical Grade Wallmount Switching Power Adapters

12W Medical Grade Wallmount Switching Power Adapters
mpu12A series
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range
Frequency Range
Input Current

Inrush Current, typ (Cold Start)

Leakage Current
90-264 VAC
47-63 Hz
Low Line (115VAC)
High Line (230VAC)
Low Line (115VAC)
High Line (230VAC)
<100 uA
OUTPUT SPECIFICATIONS
0.35A max.
0.22A max.
16A max.
30A max.
Input-Out Isolation
Efficiency
Safety
4000 VAC
(FL, 230Vin)
72%, typ
UL60601-1, CSA-22.2 No601.1-M90
PHYSICAL SPECIFICATIONS
Size
Construction
Weight
2.56” x 2.16” x 1.38” (65x55x35mm)
Wallmount Style
5.64oz (160g)
Voltage and Current
Output Power Range
Load Regulation (0-FL, 230Vin)
Line Regulation (FL)
Over Voltage Protection
Over Current Protection
Transient Response
Temperature Coefficient
Ripple/Noise
Short Circuit Protection
Start Up / Hold Up Time
See Selection Charts
0 to FL Rating
± 5%, max.
± 1%, max.
112-132%
110-150%
100Vin, FL to 1/2L
4mS
±0.04%/°C, typ
FL, 90Vin
1% Pk-Pk max.
Continuous, self-recovering *
100Vin, FL 2S max. / 16mS min.
ENVIRONMENTAL SPECIFICATIONS
Oper. Temperature


Storage Temperature
Relative Humidity
EMC

MTBF
0 to +40°C (FL) *
50% Load @ 70°C
(See Derate Curve Next Page)
-40 to +85°C *
5% to 95%, non-cond *
120Vin:
FCC Part 15 Class B
230Vin:
CISPR-22 Class B
100,000 Hrs
All specifications are typical at nominal input, full load, and 25°C unless other-
wise noted
* These are stress ratings. Exposure of the devices to any of these conditions
may adversely affect long term reliability. Proper operation under conditions
other than the standard operating conditions is neither warranteed nor implied.
WWW.ASTRODYNE.COM
Astrodyne products are not authorized or warranteed for use
as critical components in life support systems, equipment used
in hazardous environments, nuclear controls systems, or other
mission-critical applications.
ASTRODYNE USA: 1-800-823-8082
ASTRODYNE PACIFIC: 886-2-26983458
ASTRODYNE EUROPE: 353 51 561060