SUU80 Datasheet, PDF (1/2 Pages) Astrodyne Corporation – 80W Ubracket Switching Power Supplies For I.T.E.

SUU80 SERIES
80W U-bracket Switching Power Supplies For I.T.E.
Description:
The SUU80 series of compact, open frame constructed, AC/DC
switching mode power supplies provide 80 Watts of continuous output
power .They are suited for use in based systems, portable equipments
and many other applications. All models meet FCC Part-15 class B and
CISPR-22 class B emission Limits and are designed to comply with
UL/c-UL(UL 60950-1:2ndEdition),TUV/Bauart(EN 60950-1:2ndEdition)
and new CE requirements. All units are 100% burned in and tested.
Features:
Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz
Internal EMI filter
Dual and Triple Output
Input connector mates with Molex housing 09-50-3051 and
Molex 2478 series crimp terminal
Output connector mates with Molex housing 09-50-3131 and
Molex 2478 series crimp terminal
Input Surge Current, Over Voltage and Over Load protection
Over Voltage Protection (Crowbar Design)
Active Power Factor Correction
Class I
2 year warranty
Safety Approvals :
BAUART
GEPRUFT
TYPE
Product Safety APPROVED
CB
Electrical Characteristics:
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Safety Approvals Input
Vin ^{Voltage Range}
Operate Voltage Range
100
240 VAC
90
260 VAC
fin Input Frequency
PF Power Factor Correction
Po Output Power Range
Vo Output Voltage Range
Io Output Current Range
Io=Full load, Vin=90~260VAC
Vin=90 to 260 VAC
47
63 Hz
0.95 0.97 1.0
0
80
W
See rating Chart V
See rating Chart A
Iil
Iih
I rl
I rh
Eff
Input Current (Low Line)
Input Current (High Line)
Low Line Inrush Current
High Line Inrush Current
Efficiency
Io=Full load, Vin=115VAC
Io=Full load, Vin=230VAC
Io=Full load, 25 C,Cool start,
Vin=115VAC
Io=Full load, 25 C,Cool start,
Vin=230VAC
Io=Full load, Vin=230VAC
1.2 _A
0.6 A
39 45 A
78 90 A
70 80 85 %
REG-i Line Regulation
Io=Full load
0.5 1
%
REG -o
OVP
OCP
Load Regulation
Over Voltage Protection
Over Current Protection
Vin=230VAC
5
7
%
112
132 %
110
150 %
Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC
Thold Hold-Up Time
Io=Full load, Vin=110VAC
16
4
mS
mS
Ts ^{Start Up Time}
Io=Full load, Vin=100VAC
* ^{Vp-p Ripple & Noise (Peak to Peak) Full load, Vin=90VAC}
Ilk Safety Ground Leakage Current Io=Full load, Vin=240VAC
TC Temperature Coefficient All output
2
0.5 1
0.5 0.75
-0.04
0.04
S
%
mA
%/ C
* ^{Note: The Ripple & Noise which is under 3.3VDC at 2% max}
Environmental :
Sym.
Parameter
Toper Operating Temperature
T e s t Conditions
Tstg Storage Temperature
Ho Operating Humidity
Hr Storage Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd Derate linearly from 100% load at 50 C to 50% load at 70 C
Min. Typ. Max.
0 50 70
-40
85
0
95
0
75
0.1M
Unit
C
C
%
%
Hrs