SUU100 Datasheet, PDF (1/2 Pages) Astrodyne Corporation – 1000W U-bracket Switching Power Supplies For I.T.E.

SUU100 SERIES
100W U-bracket Switching Power Supplies For I.T.E.
Description:
The SUU100 series of compact, open frame constructed, AC/DC
switching mode power supplies provide 100 Watts of continuous output
power .They are suited for use in based systems, portable equipments
and many other applications. All models meet FCC Part-15 class B and
CISPR-22 class B emission Limits and are designed to comply with
UL/c-UL(UL 60950-1:2ndEdition),TUV/Bauart(EN 60950-1:2ndEdition)
and new CE requirements. All units are 100% burned in and tested.
Features:
Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz
Internal EMI filter
Single Output
Input connector mates with Molex housing 09-50-3051 and
Molex 2478 series crimp terminal
Output connector mates with Molex housing 09-50-3131 and
Molex 2478 series crimp terminal
Input Surge Current, Over Voltage and Over Load protection
Over Voltage Protection (Crowbar Design)
Active Power Factor Correction
Class I
2 year warranty
Safety Approvals :
BAUART
GEPRUFT
TYPE
Product Safety APPROVED
CB
Electrical Characteristics:
Sym.
Parameter
Test Conditions
Min. Typ. Max. Unit
Safety Approvals Input
Vin ^{Voltage Range}
Operate Voltage Range
100
240 VAC
90
260 VAC
fin Input Frequency
47
63 Hz
PF Power Factor Correction
Io=Full load, Vin=90~260VAC
0.95 0.97 1.0
Po Output Power Range
Vo Output Voltage Range
Io Output Current Range
Vin=90 to 260 VAC
0
100 W
See rating Chart V
See rating Chart A
Iil
Iih
I rl
I rh
Eff
Input Current (Low Line)
Input Current (High Line)
Low Line Inrush Current
High Line Inrush Current
Efficiency
Io=Full load, Vin=115VAC
Io=Full load, Vin=230VAC
Io=Full load, 25 C,Cool start,
Vin=115VAC
Io=Full load, 25 C,Cool start,
Vin=230VAC
Io=Full load, Vin=230VAC
1.6 _A
0.8 A
44 50 A
88 100 A
70 80 85 %
REG-i Line Regulation
Io=Full load
0.5 1
%
REG -o Load Regulation
Vin=230VAC
3
5
%
OVP Over Voltage Protection
112
132 %
OCP Over Current Protection
110
150 %
Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC
4
mS
Thold Hold-Up Time
Io=Full load, Vin=110VAC
16
mS
Ts
* ^Vp-p
Ilk
Start Up Time
Io=Full load, Vin=100VAC
Ripple & Noise (Peak to Peak) Full load, Vin=90VAC
Safety Ground Leakage Current Io=Full load, Vin=240VAC
2
S
0.5 1
%
0.5 0.75 mA
TC Temperature Coefficient All output
-0.04
0.04 %/ C
* ^{Note: The Ripple & Noise which is under 3.3VDC at 2% max}
Environmental :
Sym.
Parameter
Toper Operating Temperature
T e s t Conditions
Tstg Storage Temperature
Ho Operating Humidity
Hr Storage Humidity
MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F
Pd Derate linearly from 100% load at 50 C to 50% load at 70 C
Min. Typ. Max.
0 50 70
-40
85
0
95
0
75
0.1M
Unit
C
C
%
%
Hrs