LPS250 Datasheet, PDF (2/2 Pages) Astec America, Inc – 250 Watts

AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: [phone]
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: [phone]
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Kwai Fong, New Territories
Hong Kong
Telephone: [phone]
Facsimile: 852-2402-4426
Ordering Information
Model
Number
LPS252-C
LPS253-C
LPS254-C
LPS255-C
Output
Voltage
5 V (3-6 V)
12 V (6-12 V)
15 V (12-24 V)
24 V ( 24-48 V)
Minimum
Load
1.50 A
0.63 A
0.50 A
0.32 A
Maximum Load with
30 CFM Forced Air
50 A
21 A
16.7 A
10.4 A
Peak
Load1
60 A
25 A
20 A
12.5 A
Regulation2
±2%
±2%
±2%
±2%
Ripple
P/P (PARD)3
50 mV
120 mV
150 mV
240 mV
Notes:
1. Peak current lasting <30 seconds with a maximum 10% duty cycle.
2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings.
3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges.
4. If optional CF or CEF fans are not used, 30CFM forced air cooling needs to be provided and is required through
the length of the power supply. Not convection rated.
5. Output voltage adjustment requires a minimum load.
6. Remote inhibit resets OVP latch
Note: -CF suffix added to the model number indicates cover with top fan.
-CEF suffix added to the model number indicates cover with dual end mounted fan cover and AC inlet.
Pin Assignments
Connector
SK1 PIN 1 Neutral
PIN 2 Line
PIN 3 Ground
SK3 PIN 1 + Remote sense
PIN 2 - Remote sense
PIN 3 Remote inhibit (N.O)
PIN 4 Remote inhibit (N.C)
PIN 5 Common
PIN 6 Current sharing
PIN 7 Power Fail
PIN 8 DC Power Good
SK4 PIN 1 + Fan’s power source (12 V @ 500 mA)
PIN 2 - Fan’s power source (12 V @ 500 mA)
SK5 PIN 1 + Supervisory output supply (5 V @ 100 mA)
PIN 2 - Supervisory output supply (5 V @ 100 mA)
SK7 PIN 1 + Fan’s power source (12 V @ 500 mA)
PIN 2 - Fan’s power source (12 V @ 500 mA)
Mating Connectors
SK3 Molex 22-01-1084
PINS:08-70-0057
SK4 Molex 22-01-3027
PINS: 08-50-0114
SK5 Molex 22-01-3027
PINS: 08-50-0114
SK7 Molex 22-01-3027
PINS: 08-50-0114
Astec Connector Kit #70-841-005, includes all the above.
www.astecpower.com
6-32 (2 places)
Main Output
Terminal
Block TB1
+ve -ve
10.0
Output
Voltage
Adjust ^SK3
12345678
SK5
SK4
FAN
SK7
FAN
M3 (4 places)
#6-32 UNC (8 places)
.24 (6.1)
10.0
3.68
(93.6)
5.46
(138.6)
Optional
(-CF) 3.15
Cover (80)
with Fan
2.17
(55)
6.64
(168.6)
8.52
(216.4)
9.0
(228.6)
10.32
(262.0)
10.0
6-32 (3 places)
321
SK1
5.0 (127.0)
Optional
(-CEF)
Cover
with fans
1.18 (30.0)
2.0
(50.8)
3.0
(76.2)
.55
(14)
1.30
(33.0)
AC Inlet
.79
(20)
3.42 (87.0)
Notes:
1. Specifications subject to change without notice.
2. All dimensions in inches (mm), tolerance is ±.02”.
3. Specifications are at factory settings.
4. To enable normally closed remote inhibit, cut
jumper J1.
5. Mounting maximum insertion depth is 0.12”.
6. Warranty: 1 year
7. Weight: 2.6 lb / 1.19 kg
125