ALQ15XX48X Datasheet, PDF (19/19 Pages) Astec America, Inc – Industry Standard ¼ Brick: 36V-75V Input / 60W Output Power

Technical Reference Notes
ALQ15XX48X Series
(Open Frame Dual Output Quarter Brick)
Mechanical Specifications (continued)
SOLDERING CONSIDERATIONS
The ALQ15 series converters are compatible with standard wave soldering techniques. When wave soldering, the
converter pins should be preheated for 20-30 seconds at 110°C and wave soldered at 260°C for less than 10 seconds.
When hand soldering, the iron temperature should be maintained at 425°C and applied to the converter pins for less
than 5 seconds. Longer exposure can cause internal damage to the converter. Cleaning can be performed with cleaning
solvent IPA or with water.
PART NUMBERING SCHEME FOR ORDERING
OUTPUT OUTPUT
VOLTAGE VOLTAGE
ENABLE LOGIC
1
2
ALQ15 v
w 48
x
-
A = 5.0V
F = 3.3V
F = 3.3V
G = 2.5V
F = 3.3V
G = 2.5V
Y = 1.8V
M = 1.5V
“Blank” = Positive
"N" = Negative
PIN LENGTH
OPTION
SPECIAL
FEATURE
y
“Blank”= 5mm (Std)
“-6” = 3.7mm
z
“D” – Special
Trim function
TABLE 2. Part Numbering information.
Please call 1-888-41-ASTEC for further inquiries
or visit us at www.astecpower.com
MODEL: ALQ15 SERIES
MARCH 4, 2004 - REVISION 01
SHEET 19 OF 19