ALQ25B50_03 Datasheet, PDF (11/11 Pages) Astec America, Inc – Industry Standard ¼ Brick: 300W DC Transformer

Technical Reference Notes
ALQ25B50 Bus Converter
DC Transformer
Mechanical Specifications (continued)
SOLDERING CONSIDERATIONS
The ALQ25B50 series converters are compatible with standard wave soldering techniques. When wave soldering, the
converter pins should be preheated for 20-30 seconds at 110°C and wave soldered at 260°C for less than 10 seconds.
When hand soldering, the iron temperature should be maintained at 425°C and applied to the converter pins for less
than 5 seconds. Longer exposure can cause internal damage to the converter. Cleaning can be performed with cleaning
solvent IPA or with water.
PART NUMBERING SCHEME FOR ORDERING
ALQ25
OUTPUT
VOLTAGE
x
B = 12V
ENABLE LOGIC
50
y
N = Negative Enable
“Blank” = Positive Enable (Default)
Please call 1-888-41-ASTEC for further inquiries
or visit us at www.astecpower.com
MODEL: ALQ25B50 SERIES
SEPTEMBER 11, 2003 - REVISION A (PRELIMINARY)
SHEET 11 OF 11