LPX50 Datasheet, PDF (1/2 Pages) Astec America, Inc – LPX50 Enclosure

Embedded Power for
Business-Critical Continuity
LPX50
Enclosure
Installation Notes
LPX50 • Cover Enclosure Kit
LPX50 will fit the LPX5X power supplies.
Rev. 11.07.05
LPX50 Enclosure
1 of 2
OUTPUT TERMINALS
INPUT TERMINALS
Materials
1 Base
1 Cover
4 M3X6mm Pan head screws
with spring washer
4 M3X6mm countersunk
screws
1 M4 nut
1 M4 star washer
1 M4 spring washer
1 Plastic insulator sheet
INSULATOR
(4X)STANDOFF
GROUND STUD
.6)
Notes
1. All dimensions are in inches (mm)
2.Overall dimensions: 4.685 (119.0) x 2.945 (74.8) x 1.693 (43.0)
3.Base plate has three sets of customer mountings:
a. Bottom mounting (4X) M3 inserts. Max. screw penetration 0.0787 (2mm)
b. Bottom mounting (2X) 4mm clear holes plus 2 keyways. (see keyway detail)
c. Side mountings (4X) M3 inserts. Max. screw penetration 0.236 (6mm)
4.Ensure insulator is correctly fitted in base under PCB to maintain safety creepage and
clearances.
5.Ensure base is firmly connected to supply earth via the earth stud marked
6.When using this enclosure, ensure that relevant safety standards (e.g., EN60950) are
complied with, in respect to creepage and clearance distances, and distances through
insulation.