LPS25 Datasheet, PDF (1/3 Pages) Astec America, Inc – 25 Watts

Embedded Power for
Business-Critical Continuity
LPS25 Series
25 Watts
Total Power:
Input Voltage:
# of Outputs:
25-40 Watts
85-264 VAC
120-300 VDC
Single
RoHS
Rev. 04.13.06
LPS25 Series
1 of 3
Special Features
• Universal input
• 3" x 5" footprint
• Less than 1U high
• Remote sense
• Terminal block option (-T)
• Built-in EMI filter
• Low output ripple
• Adjustable output
• Overvoltage protection
• Overload protection
• 110 KHz switching frequency
• LPX40 enclosure kit available
Safety
VDE 0805 EN60950 (IEC950)
11774-3336-1241
(LC#84936)
UL
UL1950 E132002
CSA CSA 22.2-234 Level 3
LR53982C
NEMKO EN 60950/EMKO-TUE
P95100442 (74-sec) 203
CB
Certificate and report
1577, 1578, 1579, 1580
CE Mark (LVD)
Electrical Specifications
Input
Input range
85-264 VAC; 120-300 VDC
Frequency
47-440 Hz
Inrush current
<15A peak @ 115VAC; <30A peak @ 230VAC, cold start @ 25°C
Input current
1A max. (RMS) @ 115VAC
Efficiency
70% typical at full load
EMI filter
Safety ground
leakage current
FCC Class B conducted; CISPR 22 Class B conducted;
EN55022 Class B conducted
<0.5 mA @ 50/60 Hz, 264 VAC input
Output
Maximum power
25 W for convection; 40W with 30CFM forced air
Adjustment range
-5, +10% minimum
Hold-up time
20 ms @ 25W load, 115VAC nominal line
Overload protection ^{Short circuit protection on all outputs}
Case overload protected @ 110 -145% above peak rating
Overvoltage protection _{5V output; 5.7 to 6.7VDC. Other outputs 10% to 25% above}
nominal output
Remote sense
Compensates for 0.5 V lead drop minimum
Will operate without remote sense connected
Reverse connection protected