IMP Datasheet, PDF (1/8 Pages) Power-One – 1...12 Watt DC-DC Converters

Embedded Power for
Business-Critical Continuity
TM
Intelligent MP
Series
Up to 1500 Watts
Total Power: Up to 1500 Watts
Input Voltage: 85 - 264 VAC
120-300 VDC
# of Outputs: Up to 21
RoHS
Rev. 1.30.06
iMP Series
1 of 8
Special Features
• Full Medical EN60601 Approval
• Intelligent I²C Control
• Configurable Current Share
on all outputs >10A
• Voltage adjustment on all out-
puts (Manual or I²C)
• Configurable Input and Output
OK signals and indicators
• Configurable Inhibit/Enable
• Configurable Output
UP/DOWN sequencing
• Intelligent fan
(speed control/fault status)
• Customer Provided Air Option
• uP Controlled PFC input with
active Inrush protection
• I²C monitor of Voltage,
Current, and Temp
• IPMI Compliant
• Programmable Voltage, Current
Limit, Inhibit/Enable through I²C
• Optional Extended Hold-up
Module
(Semi F47 compliance)
• Power density increased by 50%
• Backward compatibility with
standard MP
• External switching frequency
sync input
• Optional Conformal Coating
• Industrial Temp Range
• No preload required
Electrical Specifications
Input
Input range
Frequency
Inrush current
Efficiency
Power Factor
Turn-on time
85-264 VAC: 120-350 VDC
(Limited to 300VDC in medical applications)
47-440 Hz
40A peak max. (soft start)
up to 85% @ full case load
0.99 typ. meets EN61000-3-2
AC on 1.5 sec typ., Inhibit / Enable 150 ms typ.
Programmable
EMI Filter
Leakage current
Radiated EMI
Holdover storage
AC OK
Harmonic distortion
Isolation
Global Inhibit/Enable
Input fuse (internal)
Warranty
CISPR 22 / EN55022 Level “B”
300 μA max. @ 240 VAC; 47-63Hz
CISPR 22 / EN55022 Level “B”
20 ms minimum (independent of input VAC) additional
34mSEC holdover storage with optional HUP module
(Semi F47 compatible)
>5 ms early warning min. before outputs lose regulation.
Programmable. Full cycle ride thru (50 Hz)
Meets EN61000-3-2
Meets EN60950 and EN60601
TTL, Logic “1” and Logic “0”. Configurable.
iMP4: 10A; iMP8: 20A; iMP1: 20A (both lines fused)
2 years