APC12 Datasheet, PDF (1/2 Pages) Astec America, Inc – 40 Watts

40 Watts
APC12 (12 Amps)
Preliminary
Total Power:
Input Voltages:
No. of Outputs:
40 Watts
1.8 to 13 V
Single
Electrical Specs
Special Features
• Point of load (POL) applications
• High efficiency, 3.3V @ 92% (Typ)
• -40°C to +85°C Ambient operating
temperature
• Open Frame SMT
• Positive enable function
• Low output ripple and noise
• Regulation to zero load
• Programmable Output from 0.9V to 3.6V
(External Trim Resistor or Voltage Source)
• Fixed frequency switching (200 kHz)
Input
Input range
Input Surge
Efficiency
Control
Enable
Output
Regulation
(Line, Load, Temp)
Ripple and noise¹
Output voltage
adjust range
Transient Response
Isolation
1.8-6.0VDC and 5.6-13.0VDC
7V for 03 version
14V for 08 version
3V3 @ 92% (Typ)
TTL compatible
(positive enable)
<3%
75mV - (2.5V to 3.6V Output)
50mV - (0.9V to 2.4V Output)
0.9V to 3.6V
typical 5% deviation with
50% to 75% full load
650 µS recovery
Non-Isolated module
Specifications subject to change without notice.
Environmental
Operating temperature
-40°C to +85°C
Storage temperature: -40°C to +125°C
MTBF: >1 million hours
Safety
UL, cUL 609500 Recognized
TUV EN60950 Licensed
REV C:JANUARY 03
2 _{North America (USA): 1-888-41-ASTEC}
Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662