APA18 Datasheet, PDF (1/2 Pages) Astec America, Inc – 60 Watts

60 Watts
APA18 (18 Amps)
Total Power:
Input Voltages:
No. of Outputs:
60 Watts
3.0V to 5.5V
Single
Special Features
• Point of load (POL) applications
• High Current slew rate at 2.5A/us¹
• Open frame SIP
• High efficiency, 3.3V @ 95% (Typ)
• Adjustable Output through external resistor
programming
• -40°C to +85°C Ambient operating temperature
• UVLO protection
• Positive Enable function
• Low output ripple and noise
• Regulation to zero load
Environmental
Operating temperature
-40°C to +85°C (Ambient temperature)
Storage temperature: -40°C to +125°C
MTBF: >1 million hours
Electrical Specs
Input
Input range
Efficiency
Control
Enable
Output
Line Regulation
Load Regulation
0.75Vo
0.75 < Vo < 3.3V
3.3V ≤ Vo
Load Current
Ripple and noise
Output Adjust Range
Current Slew Rate
Transient Response¹
Remote Sense
Turn On Input Voltage
OCP/OTP
Isolation
3.0V to 5.5V
3.3V @ 95% (Typ)
TTL compatible
(positive enable)
<0.5%
10mV
15mV
30mV
18A max (Po ≤ 60W)
50mVp-p
0.75V - 3.3V
up to 2.5A/µS
300mV typical deviation (3.3V_o)
for 50% to 100% step load
100 µS recovery
10% of Vo
3.0V (Typical)
Hiccup - auto recovery
Non-Isolated module
Specifications subject to change without notice.
Note: 1. with output capactior of 100uF Tantalum + 1 uF
Ceramic cap
Safety
UL, cUL 609500 Recognized (Pending)
TUV EN60950 Licensed (Pending)
2 _{North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662}