AIF04ZPFC-01 Datasheet, PDF (1/2 Pages) Astec America, Inc – 1600 Watts

1600 Watts Total Power:
Input Voltages:
No. of Outputs:
AIF - PFC Series
1600 Watts
85 - 264VAC
Single
Electrical Specs
Special Features
• Unity power factor
• High efficiency - up to 95%
• Universal input voltage and frequency range
• Up to 1600W output power
• Positive and Negative enable function
• Parallelable with accurate current sharing
• <10% harmonic distortion conforming to
IEC1000-3-2 Compliance
• 100°C baseplate operating temperature
• DC Input option
• Power fail warning signal
• Enable output to control DC-DC Converter
• EEPROM data storage via I2C Interface
• External inrush current limited protection
• Power Density up to 290W/in³
Environmental
Operating temperature
-40°C to +100°C (baseplate temperature)
Storage temperature: -40°C to +120°C
Overtemperature protection: 120°C max
Calculated MTBF: 450K hours
Input
Input range
Input Surge
Input Frequency
Efficiency
85 - 264VAC / 120 - 370VDC
(Configurable)
290VAC / 1s
50/60 Hz
95% @230Vac, 1600W (Typ)
Total Harmonic Distortion Less than 10%
Power Factor
0.99 typical (Po ≥ 500W);
0.97 typical (Po ≥ 1000W)
Control
Power Fail Warning
Direct drive output to opto-isolator
Power Fail Warning Adjust 195 to 355Vdc adjustable
LD Enable
Direct drive output to opto-isolator
PFC Enable
TTL compatiable (Pos and Neg)
Voltage Adjust
76% to 100% Vo
DC Input Enable
Clock Input (external sync)6Vp-p typical @ 1MHz ± 5%
Clock Output (int. clock) 6Vp-p typical @ 1MHz ± 5%
Temperature
Monitor Output
10mV/°C
Current Monitor Output 0 to 1mA (1mA = 4.2A output)
I2C Interface
Output
Output Voltage
Current Share Accuracy
Overvoltage Protection
Power Limit for AC input
380V typical(Io =4.2A / Vi>180Vac)
393V typical (Io = 0A)
10% max
430 max
Vin = 85Vac, Pmax = 1000W
Vin = 230Vac, Pmax = 1600W
for DC input Vin = 370Vdc, Pmax =1600W
Not
Nominal values apply with sense pins connected and other
control pin unconnected.
Specifications subject to change without notice.
Safety
UL cUL 60950 Recognized
TUV EN60950 Licensed
Technical Support : (888) 41 - ASTEC or [phone]
Americas : [phone]
Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662