AD5012N3LM Datasheet, PDF (1/2 Pages) Astec America, Inc – AD50 Medical Series

Embedded Power for
Business-Critical Continuity
AD50 Medical Series
50 Watts
Total Power:
Input Voltage:
# of Outputs:
50 Watts
90 - 264 VAC
Single
Rev. 05.18.11_108
AD50 Medical Series
1 of 2
Special Features
• Universal AC input
• Fully regulated output
• EN61000-3-2 compliant
• Input power < 74 watts
• Overcurrent and overvoltage
protection
• High efficiency
• High MTBF
• IEC320 AC input receptacle
3 pin (type C6) - AD5012N3LM
2 pin (type C8) - AD5012N2LM
• Built in EMI filter
• (CISPR 22 Class B)
• AC input fuse
• Complies with One Watt
Input Energy Star / Blue Angel
Requirement
Safety
CSA_UL UL 60601-1
CSA 60601-1
VDE 60601-1
Electrical Specifications
Input
Input ra­nge:
90 - 264 Vac (wide range)
Frequency:
47 - 63 Hz
Inrush current:
60 A maximum @ 230 VAC, cold start 25 °C
Input current:
2 A maximum
Efficiency:
80% typical
EMI/RFI:
FCC Part 15, Class B & EN55022 (CISPR 22) Class B
Safety ground
leakage current:
300 µA maximum @ 50/60 Hz, 264 VAC input - AD5012N3L
100 µA maximum @ 50/60 Hz, 264 VAC input - AD5012N2L
Output
Maximum Power (Po): ^{50 W}
Hold-up time:
17 ms. minimum at full load @ 100 Vac, 47 Hz
Overvoltage protection:
Overcurrent protection:
Cable/connector :
16 - 20 V
Latching type, recycle AC to reset.
Output short circuit protection auto recover
Overload protection @ 110 - 120% above maximum rating
DC cable with 2.5 mm x 5.5 mm barrel plug
DC plug center +v
DC plug outer -v
Environmental Specifications
Operating temperature: _{5° to +40 °C ambient}
Storage temperature:
Electromagnetic
susceptibility:
-40 °C to +70 °C
Designed to meet EN61000-4-2, -4, -5, level 4;
EN61000-4-3, -6, 10v/m; EN61000-4-8, -11; EN61000-3-3
and EN61000-3-2 Class A
Humidity:
Operating; non-condensing 10% to 90% RH
MTBF demonstrated: > 300,000 hours at full load and 25 °C ambient conditions