AD10048P3L-001 Datasheet, PDF (1/2 Pages) Emerson Network Power – Universal ac input

Embedded Power for
Business-Critical Continuity
AD10048P3L-001
100 Watts
Total Power:
Input Voltage:
# of Outputs:
100 Watts
90 - 264 Vac
Single
Rev. 03.16.11_14
AD10048P3L-001
1 of 2
Special Features
• Active power factor correction
• EN6100-3-2 compliant
• CE Mark EMC & LVD
• Universal ac input
• Fully regulated output
• Overcurrent, overvoltage
and thermal protection
• Constant voltage
• Level V efficiency
• High MTBF
• IEC320 ac receptacle, 3 pin
(type C6)
• Built in EMI filter
• (CISPR 22 Class B)
• AC Input fuse
• Complies with One Watt Input
Energy Star / Blue Angel
requirement
• POE isolation on output
Safety
• UL
UL 60950-1
• CSA CSA-C22.2 no.60950-1
• NEMKO EN/IEC60950-1
• CB
Certificate and report
Electrical Specifications
Input
Input ra­nge:
Frequency:
Inrush current:
Input current:
Efficiency:
EMI/RFI:
Safety ground
leakage current:
Output
Maximum Power (Po):
Hold-up time:
Overvoltage protection:
Overcurrent protection:
Thermal protection:
90 - 264 Vac (wide range)
47 - 63Hz
40 A maximum @ 264 Vac, cold start 25 °C
1.8 A maximum
90% typical
FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class-B
3.5 mA maximum @ 50/60 Hz, 264 Vac input
100 W
10 ms. minimum at full load @ 115 Vac
53 - 60 V
Latching type, recycle ac to reset
Output short circuit protection auto recover
Overload protection @ 110 - 120% above maximum rating
105 °C to 120 °C Trip point; output will latch off
Cable/connector:
DC cable length 2.5 mm center plug
DC plug center +v
DC plug outer -v
Environmental Specifications
Operating temperature:
Storage temperature:
Electromagnetic
susceptibility:
0 ° to + 45 °C ambient
- 40 °C to + 70 °C
Designed to meet EN61000-4-2, -4, -5, level 4;
EN61000-4-3, -6, 10v/m; EN61000-4-8, -11; EN61000-3-3
and EN61000-3-2 Class A
Humidity:
MTBF demonstrated:
Operating; non-condensing 5% to 90% RH
> 300,000 hours at full load and 25 °C ambient conditions